Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 16GB DDR4 2933MHz ECC Registered RDIMM 2Rx8 CL21 1.2V 288pin System Specific Memory

SKU CH-R38N-32A75

16 GB DDR4-2933 ECC registered RDIMM for Supermicro X11SP series motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • 16GB DDR4 2933MHz ECC registered RDIMM for Supermicro X11SP server boards
  • CL21 latency at 1.2V gives stable throughput for 24/7 workloads
  • 2Rx8 dual-rank organisation increases memory density per slot
  • Backward compatible with 2133MHz 2400MHz 2666MHz systems for flexible deployment
  • Replaces Supermicro MEMDR416LCL01ER29 MEMDR416LCL03ER29 MEM-DR416LD-ER29 MEMDR416LHL04ER29 MEMDR416LHL05ER29

OWC 16GB DDR4 2933MHz ECC RDIMM

This module provides 16GB of DDR4 ECC registered memory rated at 2933MHz with CL21 latency. It is designed for server and workstation platforms that require registered DIMMs. The part is validated for Supermicro X11SPi-TF, X11SPL-F, X11SPM-F, X11SPM-TF and X11SPM-TPF motherboards. It will not work in standard desktop computers.

Verify registered DIMM support before ordering

Confirm that your motherboard accepts 288-pin DDR4 registered ECC modules and that the CPU memory controller supports 2933MHz operation. The module runs at 1.2V and is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds. Registered memory cannot be mixed with unbuffered memory in the same system.

Low-profile design without heat spreader

The 288-pin RDIMM lacks a heat spreader, keeping the height low for dense server chassis. Gold-edge connectors meet JEDEC and RoHS specifications for reliable insertion. The 2Rx8 rank organisation suits multi-channel server configurations. OWC tests every module in-house before shipment.

Kohokohdat

  • 16GB DDR4 2933MHz ECC registered RDIMM for Supermicro X11SP server boards
  • CL21 latency at 1.2V gives stable throughput for 24/7 workloads
  • 2Rx8 dual-rank organisation increases memory density per slot
  • Backward compatible with 2133MHz 2400MHz 2666MHz systems for flexible deployment
  • Replaces Supermicro MEMDR416LCL01ER29 MEMDR416LCL03ER29 MEM-DR416LD-ER29 MEMDR416LHL04ER29 MEMDR416LHL05ER29

Tekniset tiedot

BrandOWC
Part Number2R9D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SPi-TF
Supermicro Motherboard X11SPL-F
Supermicro Motherboard X11SPM-F
Supermicro Motherboard X11SPM-TF
Supermicro Motherboard X11SPM-TPF

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 16GB DDR4 2933MHz ECC Registered RDIMM ship alone or as a kit?

The module is sold as a single 16GB stick; add more sticks to reach the capacity your Supermicro board supports.

Should I pick the 2933MHz CL21 version or a slower speed for my X11SPM-F?

Choose this 2933MHz CL21 module; it runs at 2933MHz and also works at 2666MHz, 2400MHz and 2133MHz if the system requires it.

Will the advertised 2933MHz speed actually run at that rate in my Supermicro X11SPi-TF?

Yes, the board supports 2933MHz DDR4, so the module operates at its rated 2933MHz CL21 without manual tuning.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.