NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Adds 16 GB of DDR4 ECC memory at 3200 MT/s with CL22 latency and 1.2 V operation for workstations, servers and NAS systems
This 16GB DDR4 module runs at 3200 MT/s with CL22 latency and 1.2V operation. It is an unbuffered ECC DIMM built for select workstations, servers and NAS systems. The 2Rx8 organisation and 288-pin form factor follow JEDEC standards for broad platform compatibility. No heat spreader is fitted, keeping the profile very low.
JEDEC compliance means the rated 3200 speed and CL22 timings are maintained during continuous operation rather than only in short bursts. ECC circuitry detects and corrects single-bit errors on the fly, preserving data integrity in long-running server and NAS workloads. The 1.2V supply remains stable without elevated voltage headroom. Dual-rank density supports consistent throughput across extended sessions.
With no heat spreader or active cooling, the module runs silently and relies on chassis airflow for thermal management. At 1.2V the power draw per stick is modest, reducing aggregate load on the system power supply. The very-low-profile height avoids obstructing CPU cooler fans or airflow paths in dense server enclosures. JEDEC-standard construction ensures reliable operation within normal case temperatures.
| Brand | OWC |
|---|---|
| Part Number | 3E2V42R816GB |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Yes, the module uses the industry-standard 288-pin DDR4 DIMM form factor, so it installs in any desktop or workstation board that accepts unbuffered DDR4 memory.
The module is built with ECC support, allowing the system to detect and correct single-bit errors for improved data integrity in servers and NAS devices.
For best stability, populate all slots with identical capacity, speed and manufacturer modules; mixing different kits may force the system to run at lower speeds or cause instability.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?