OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
Adds 16 GB of DDR4 ECC memory at 3200 MT/s with CL22 latency and 1.2 V operation for workstations, servers and NAS systems
This 16GB DDR4 module runs at 3200 MT/s with CL22 latency and 1.2V operation. It is an unbuffered ECC DIMM built for select workstations, servers and NAS systems. The 2Rx8 organisation and 288-pin form factor follow JEDEC standards for broad platform compatibility. No heat spreader is fitted, keeping the profile very low.
JEDEC compliance means the rated 3200 speed and CL22 timings are maintained during continuous operation rather than only in short bursts. ECC circuitry detects and corrects single-bit errors on the fly, preserving data integrity in long-running server and NAS workloads. The 1.2V supply remains stable without elevated voltage headroom. Dual-rank density supports consistent throughput across extended sessions.
With no heat spreader or active cooling, the module runs silently and relies on chassis airflow for thermal management. At 1.2V the power draw per stick is modest, reducing aggregate load on the system power supply. The very-low-profile height avoids obstructing CPU cooler fans or airflow paths in dense server enclosures. JEDEC-standard construction ensures reliable operation within normal case temperatures.
| Brand | OWC |
|---|---|
| Part Number | 3E2V42R816GB |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Yes, the module uses the industry-standard 288-pin DDR4 DIMM form factor, so it installs in any desktop or workstation board that accepts unbuffered DDR4 memory.
The module is built with ECC support, allowing the system to detect and correct single-bit errors for improved data integrity in servers and NAS devices.
For best stability, populate all slots with identical capacity, speed and manufacturer modules; mixing different kits may force the system to run at lower speeds or cause instability.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟