OWC 8GB DDR4 2933MHz CL21 ECC SODIMM laptop RAM
- 8GB
- 260-Pin DDR4 SO-DIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 16 GB DDR4 SO-DIMM running at 3200 MHz CL22 for laptops and all-in-one systems
This module provides 16GB of DDR4 memory in a 260-pin SO-DIMM format designed for laptops, all-in-one systems, and NAS devices. It operates at 3200MHz with a CL22 latency and runs at the standard 1.2V voltage. The unbuffered, non-ECC design matches JEDEC specifications for broad compatibility.
The module draws power at the standard DDR4 voltage of 1.2V without requiring a heat spreader. Passive cooling relies on the host system's internal airflow during normal operation. Power consumption scales with the 3200MHz data rate and CL22 timing profile under typical workloads.
The memory is 100% compliant with JEDEC standards and ROHS directives, ensuring a warranty-safe upgrade for supported devices. OWC validates every module in-house and backs it with a limited lifetime warranty that includes free technical support. An advanced replacement program is available to minimise downtime if an issue arises.
| Brand | OWC |
|---|---|
| Part Number | 3S2D41R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Align the notch with the slot key, press firmly until both side clips click, then verify the module sits flat; the step often missed is pushing hard enough to fully engage the clips.
No scheduled maintenance is required; the module is solid-state with no moving parts, so replacement is only needed if a fault develops or capacity needs change.
The CL22 CAS latency and 1.2V JEDEC voltage set the timing and thermal envelope; sustained heavy workloads will hit latency limits before voltage or temperature constraints.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?