Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 288-pin DDR4 RDIMM modules with black chips, no heat spreader

OWC

OWC 256GB (2x128GB) DDR4 2400 CL17 4Rx4 ECC Registered RDIMM 1.2V 288-pin server RAM

SKU CH-Z1TZ-VGG6V

256 GB dual-channel DDR4-2400 ECC registered kit with two 128 GB 4Rx4 modules at 1.2 V for server and workstation upgrades

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 256GB (2 x 128GB)

Näytä 2 muuta kokoonpanoa

Rank 4Rx4

  • ECC registered design protects data integrity in servers
  • Dual-channel 256GB kit (2×128GB) maximises memory capacity
  • DDR4 2400 CL17 speed balances throughput and latency
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits server and workstation slots

Server-grade ECC RDIMM kit

This OWC kit provides 256GB of DDR4 ECC registered memory across two 128GB modules. It targets servers, workstations and NAS systems that require registered DIMMs for data integrity. The dual-channel configuration supports high-capacity workloads in compatible multi-socket platforms. Standard desktop boards cannot use registered memory.

Verify registered DIMM support

Before ordering, confirm that your motherboard and CPU support DDR4 288-pin ECC registered RDIMMs. Registered modules will not function in platforms that accept only unbuffered memory. Check the system documentation for maximum capacity per slot and total population rules. Mixing registered and unbuffered DIMMs is not supported.

Low-profile modules for dense builds

Each module operates at 1.2V without a heat spreader, keeping the profile slim for tight server chassis. The 288-pin DDR4 interface is keyed to prevent mis-insertion. JEDEC compliance ensures electrical compatibility with qualified platforms. The bare PCB design eases installation in crowded DIMM arrays.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • Dual-channel 256GB kit (2×128GB) maximises memory capacity
  • DDR4 2400 CL17 speed balances throughput and latency
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits server and workstation slots

Tekniset tiedot

BrandOWC
Part Number2R4D44R4256P
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes in the 256GB kit and do I need anything else to install it?

The kit contains two 128GB DDR4 2400 CL17 4Rx4 ECC registered RDIMMs. No extra parts are required; install them into compatible 288-pin server DIMM slots.

Should I choose this 256GB dual-channel kit or a different capacity for my server?

Select this 256GB (2x128GB) kit when your workload needs maximum registered ECC capacity per channel; choose a smaller kit only if your platform limits total memory or rank count.

What does the DDR4 2400 PC4-19200 rating mean once the modules are running in a server?

The modules transfer data at 2400 MT/s with CL17 latency at 1.2V, delivering 19200 MB/s peak bandwidth per module while providing registered ECC error correction for data integrity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.