Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 1TB (8x128GB) DDR4 2400MHz CL17 4Rx4 ECC Registered RDIMM 1.2V 288-pin Server RAM

SKU CH-GD41-NHTB6

Eight 128 GB DDR4-2400 ECC registered RDIMMs deliver 1 TB of server-grade memory with CL17 latency at 1.2 V

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Rank 4Rx4

  • 1TB total capacity for high-density server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2400MHz CL17 at 1.2V for efficient throughput
  • 8 modules of 128GB 4Rx4 in dual-channel kit
  • JEDEC and RoHS compliant for warranty-safe upgrades

Server memory kit for enterprise upgrades

This OWC kit supplies one terabyte of DDR4 ECC registered memory across eight 128 GB modules. It is built for servers, workstations and NAS systems that require registered DIMMs with error correction. The modules run at 2400 MHz with a CAS latency of 17 and operate at 1.2 V.

Suited for registered-DIMM platforms only

The kit fits systems that accept 288-pin DDR4 RDIMMs with 4Rx4 organisation and ECC registered operation. It will not work in standard desktop computers or any platform that requires unbuffered memory. Buyers who need consumer DIMMs or a smaller capacity kit should look elsewhere.

Straightforward module installation

Each 288-pin module seats in a standard DDR4 RDIMM slot; no heat spreader is present, so clearance is minimal. The most common issue is attempting to mix these registered modules with unbuffered memory or installing them in a desktop board that does not support registered ECC. Verify the platform’s memory qualification list before fitting.

Kohokohdat

  • 1TB total capacity for high-density server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2400MHz CL17 at 1.2V for efficient throughput
  • 8 modules of 128GB 4Rx4 in dual-channel kit
  • JEDEC and RoHS compliant for warranty-safe upgrades

Tekniset tiedot

BrandOWC
Part Number2R4D44R41TBK
Capacity1TB (8 x 128GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard feature is required for the 288-pin DDR4 2400 ECC registered RDIMM modules to function?

A server or workstation motherboard with DDR4 RDIMM slots that support ECC registered memory at 1.2 V; standard desktop boards will not accept these modules.

Can the 4Rx4 registered DIMMs share a channel with older unbuffered ECC DIMMs already installed in the system?

No, registered and unbuffered ECC memory cannot be mixed on the same channel; all slots in a channel must use registered modules.

How can I verify the kit is running at the rated 2400 MT/s with ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory speed shows 2400 MT/s, the total capacity matches the installed modules, and ECC is reported as enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.