Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eight green DDR4 RDIMM modules with gold contacts and black chips

OWC

OWC 1TB (8x128GB) DDR4 2400MHz CL17 4Rx4 ECC Registered RDIMM 1.2V 288-pin Server RAM

SKU CH-GD41-NHTB6

Eight 128 GB DDR4-2400 ECC registered RDIMMs deliver 1 TB of server-grade memory with CL17 latency at 1.2 V

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 1TB (8 x 128GB)

Nog 2 configuraties tonen

Rank 4Rx4

  • 1TB total capacity for high-density server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2400MHz CL17 at 1.2V for efficient throughput
  • 8 modules of 128GB 4Rx4 in dual-channel kit
  • JEDEC and RoHS compliant for warranty-safe upgrades

Server memory kit for enterprise upgrades

This OWC kit supplies one terabyte of DDR4 ECC registered memory across eight 128 GB modules. It is built for servers, workstations and NAS systems that require registered DIMMs with error correction. The modules run at 2400 MHz with a CAS latency of 17 and operate at 1.2 V.

Suited for registered-DIMM platforms only

The kit fits systems that accept 288-pin DDR4 RDIMMs with 4Rx4 organisation and ECC registered operation. It will not work in standard desktop computers or any platform that requires unbuffered memory. Buyers who need consumer DIMMs or a smaller capacity kit should look elsewhere.

Straightforward module installation

Each 288-pin module seats in a standard DDR4 RDIMM slot; no heat spreader is present, so clearance is minimal. The most common issue is attempting to mix these registered modules with unbuffered memory or installing them in a desktop board that does not support registered ECC. Verify the platform’s memory qualification list before fitting.

Pluspunten

  • 1TB total capacity for high-density server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2400MHz CL17 at 1.2V for efficient throughput
  • 8 modules of 128GB 4Rx4 in dual-channel kit
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specificaties

BrandOWC
Part Number2R4D44R41TBK
Capacity1TB (8 x 128GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What motherboard feature is required for the 288-pin DDR4 2400 ECC registered RDIMM modules to function?

A server or workstation motherboard with DDR4 RDIMM slots that support ECC registered memory at 1.2 V; standard desktop boards will not accept these modules.

Can the 4Rx4 registered DIMMs share a channel with older unbuffered ECC DIMMs already installed in the system?

No, registered and unbuffered ECC memory cannot be mixed on the same channel; all slots in a channel must use registered modules.

How can I verify the kit is running at the rated 2400 MT/s with ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory speed shows 2400 MT/s, the total capacity matches the installed modules, and ECC is reported as enabled.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.