OWC 128GB (2x64GB) DDR4 2666MHz CL19 ECC Registered RDIMM 1.2V 288-pin Server RAM
- 128GB (2 x 64GB)
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
256 GB dual-channel DDR4-2666 ECC registered server memory kit with CL19 latency, 1.2 V operation, 4Rx4 organisation and 288-pin RDIMM form factor
Capacity 256GB (2 x 128GB)
This 256GB kit provides two 128GB DDR4 2666MHz registered DIMMs with ECC for servers, workstations and NAS systems. The modules run at CL19 latency and 1.2V, conforming to JEDEC PC4-21300 specifications. They are designed for multi-channel operation in compatible enterprise platforms. This memory will not work in standard desktop computers or alongside unbuffered modules.
Each module operates at the standard 1.2V DDR4 voltage without a heat spreader, relying on system airflow for cooling. The registered design adds a clock cycle of buffering, which slightly increases power draw compared with unbuffered DIMMs but improves signal integrity at high capacity. Acoustic output is determined by the host chassis fans rather than the memory itself.
The kit is fully compliant with JEDEC standards and RoHS directives, ensuring a warranty-safe upgrade for OEM systems. OWC validates every module in its in-house lab and backs the kit with a limited lifetime warranty and free technical support. An advanced replacement program is also available for qualifying issues.
| Brand | OWC |
|---|---|
| Part Number | 2R6D44R4256P |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align the notch on each 128GB module with the 288-pin slot key, press firmly until the retention clips click, then enable ECC in the BIOS — skipping the BIOS step leaves error correction inactive.
The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; replacement only occurs if a DIMM fails, at which point the matching 128GB 4Rx4 registered stick must be sourced to keep rank symmetry.
The registered buffer adds one cycle of latency, so memory-controller throughput caps before the CL19 timing or 1.2V thermal envelope becomes the bottleneck.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?