OWC 64GB DDR4 2666MHz PC4-21300 CL19 2Rx4 ECC Registered RDIMM 1.2V 288-pin Server RAM
- 64GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A single 128 GB DDR4 2666 MHz CL19 4Rx4 ECC registered RDIMM at 1.2 V for server, workstation or NAS upgrades
Capacity 128GB
This OWC 128GB DDR4 2666MHz CL19 4Rx4 ECC Registered RDIMM is built for servers, workstations and NAS systems that require registered ECC memory. It operates at 1.2V and uses a 288-pin DDR4 form factor. The module will not work in standard desktop computers and cannot be mixed with unbuffered memory.
The module runs at DDR4 2666 (PC4-21300) with CL19 latency and is backward compatible with 2133MHz and 2400MHz systems. It conforms to JEDEC specifications for registered DIMMs. Registered ECC memory is required by the platform; unbuffered or non-ECC modules are not supported in the same configuration.
A single module provides 128GB of registered ECC capacity, allowing high-density memory configurations within limited DIMM slots. The 4Rx4 organisation suits platforms qualified for quad-rank registered DIMMs. Systems that do not support registered ECC or quad-rank modules cannot use this memory.
| Brand | OWC |
|---|---|
| Part Number | 2R6D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Choose the 128GB module when your server or workstation needs maximum density per slot and the platform supports 4Rx4 registered ECC; smaller capacities use fewer ranks and may be required if the memory controller limits rank count per channel.
The module runs at 2666MHz CL19 when the platform supports that speed; if the system only supports 2133MHz or 2400MHz it will downclock automatically to the highest supported frequency while keeping ECC and registered operation.
The 288-pin DDR4 registered ECC interface fits only server, workstation or NAS boards that accept 4Rx4 RDIMMs; it cannot be used in standard desktop motherboards or mixed with unbuffered memory, and voltage is fixed at 1.2V.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?