OWC 64GB DDR4 2666MHz PC4-21300 CL19 2Rx4 ECC Registered RDIMM 1.2V 288-pin Server RAM
- 64GB
- 288-Pin DDR4 ECC RD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A single 128 GB DDR4 2666 MHz CL19 4Rx4 ECC registered RDIMM at 1.2 V for server, workstation or NAS upgrades
Capacity 128GB
This OWC 128GB DDR4 2666MHz CL19 4Rx4 ECC Registered RDIMM is built for servers, workstations and NAS systems that require registered ECC memory. It operates at 1.2V and uses a 288-pin DDR4 form factor. The module will not work in standard desktop computers and cannot be mixed with unbuffered memory.
The module runs at DDR4 2666 (PC4-21300) with CL19 latency and is backward compatible with 2133MHz and 2400MHz systems. It conforms to JEDEC specifications for registered DIMMs. Registered ECC memory is required by the platform; unbuffered or non-ECC modules are not supported in the same configuration.
A single module provides 128GB of registered ECC capacity, allowing high-density memory configurations within limited DIMM slots. The 4Rx4 organisation suits platforms qualified for quad-rank registered DIMMs. Systems that do not support registered ECC or quad-rank modules cannot use this memory.
| Brand | OWC |
|---|---|
| Part Number | 2R6D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Choose the 128GB module when your server or workstation needs maximum density per slot and the platform supports 4Rx4 registered ECC; smaller capacities use fewer ranks and may be required if the memory controller limits rank count per channel.
The module runs at 2666MHz CL19 when the platform supports that speed; if the system only supports 2133MHz or 2400MHz it will downclock automatically to the highest supported frequency while keeping ECC and registered operation.
The 288-pin DDR4 registered ECC interface fits only server, workstation or NAS boards that accept 4Rx4 RDIMMs; it cannot be used in standard desktop motherboards or mixed with unbuffered memory, and voltage is fixed at 1.2V.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟