OWC 2GB DDR3 1066 PC3-8500 CL7 1Rx8 204-pin 1.5V Non-ECC SODIMM memory upgrade for HP 430 620 625 630 635
- 2GB
- 204-Pin DDR3 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 2GB DDR3 SODIMM running at 1333MHz CL9 for compatible HP ProBook laptops
This 2 GB DDR3 SODIMM is built for HP ProBook 4720s 4730s 4740s 5310m and 5320m notebooks. It adds 2 GB of PC3-10600 memory at 1333 MHz with CL9 latency. The module is unbuffered non-ECC and runs at 1.5 V. Buyers who need more than 2 GB per slot should look at higher-capacity kits.
The stick has no heat spreader and draws power only through the 204-pin socket at the rated 1.5 V. Passive cooling inside the laptop chassis handles the thermal load without extra fan noise. Power consumption stays within the standard DDR3 envelope for this speed grade.
JEDEC and RoHS compliance make the upgrade warranty-safe for the listed ProBook models. OWC supplies a limited lifetime warranty with free technical support and an advanced replacement programme. An online installation video guides the DIY fitting process.
| Brand | OWC |
|---|---|
| Part Number | 1S3D31R802GB |
| Capacity | 2GB |
| Type | 204-Pin DDR3 Non-ECC SODIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProBook 4720s HP ProBook 4730s HP ProBook 4740s HP ProBook 5310m HP ProBook 5320m |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power off the laptop, remove the battery, open the memory access panel, insert the module at a 30-degree angle until the gold contacts are hidden, then press down firmly until both side clips click into place. The step many skip is verifying the clips have fully locked on both sides.
No scheduled maintenance is required for the memory itself. Keep the laptop's cooling vents clear of dust so the module stays within its 1.5 V operating envelope. Replacement is only necessary if you need more than 2 GB of capacity or if a module fails.
The 2 GB capacity ceiling is reached before any thermal or timing limit. With only 2 GB available, the system will swap to storage during heavy multitasking long before the DDR3 1333 CL9 module hits its voltage or temperature boundaries.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?