Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 240-pin DDR3 ECC RDIMM modules in static bags

OWC

OWC 32GB (2x16GB) DDR3 1600 CL11 2Rx4 240-pin 1.5V ECC Registered RDIMM memory upgrade

SKU CH-0MM0-DRF0K

32 GB dual-channel DDR3-1600 ECC registered kit for Supermicro X9-series workstation and server boards

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands workstation memory capacity
  • DDR3 1600 CL11 at 1.5 V matches qualified Supermicro X9 platforms
  • 240-pin 2Rx4 registered DIMMs install in validated motherboard slots
  • Replaces Supermicro MEMDR316LHL01ER16 and MEMDR316LSL01ER16 part numbers

32 GB DDR3 ECC RDIMM Kit

This kit provides 32 GB of DDR3 ECC registered memory in two 16 GB modules. It is built for workstations, servers, NAS systems and routers that require registered DIMMs. Standard desktop computers cannot use this memory and it must not be mixed with unbuffered modules.

DDR3 1600 CL11 2Rx4 capacity

The two modules run at 1600 MHz with CAS latency 11 and a 2Rx4 organisation. This configuration handles typical server workloads and multi-tasking scenarios. Systems needing higher frequencies, lower latencies or greater density per slot will exceed what this kit can deliver.

OWC validated upgrade kit

OWC tests every module in its own lab to meet JEDEC and RoHS standards. The kit replaces Supermicro part numbers MEMDR316LHL01ER16 and MEMDR316LSL01ER16 and carries a limited lifetime warranty with free technical support. No additional software or accessories are included.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands workstation memory capacity
  • DDR3 1600 CL11 at 1.5 V matches qualified Supermicro X9 platforms
  • 240-pin 2Rx4 registered DIMMs install in validated motherboard slots
  • Replaces Supermicro MEMDR316LHL01ER16 and MEMDR316LSL01ER16 part numbers

Tekniset tiedot

BrandOWC
Part Number1R6D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DAE Series
Supermicro Motherboard X9DAi Series
Supermicro Motherboard X9DBS Series
Supermicro Motherboard X9SRA Series
Supermicro Motherboard X9SRE Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 2Rx4 registered DIMMs run alongside my existing unbuffered DDR3 modules?

No, the 2Rx4 registered design cannot be mixed with unbuffered memory; the system requires all slots to use registered ECC modules.

How can I confirm the kit is running at DDR3 1600 CL11 after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report 1600 MHz, CL11 timings and 1.5 V operation for each 16 GB module.

Does the 32 GB kit include only the two 240-pin RDIMMs or are extra parts supplied?

The box contains the two 16 GB DDR3 1600 CL11 2Rx4 1.5 V ECC registered RDIMMs; no cables, brackets or additional hardware are included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.