Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR3 ECC registered DIMMs in anti-static packaging

OWC

OWC 32GB (4x8GB) DDR3 1600 CL11 ECC Registered RDIMM X9SRG X9SRH X9SRi X9SRL X9SRW memory upgrade

SKU CH-WRC1-4F4Y6

A 32 GB kit of four 8 GB DDR3 1600 CL11 ECC registered RDIMMs for Supermicro X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1600 CL11 matches qualified Supermicro X9 platforms
  • 5 V operation meets JEDEC standard for registered DIMMs
  • 240-pin RDIMM form factor fits X9SRG, X9SRH, X9SRi, X9SRL, X9SRW motherboards

Server-grade DDR3 ECC RDIMM kit

This 32 GB kit contains four 8 GB DDR3 1600 modules built for Supermicro X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards. It targets administrators upgrading workstations, servers, NAS units or routers that require registered ECC memory. Standard desktop systems cannot use these modules.

Registered ECC with 1Rx4 organisation

Each 240-pin DIMM runs at PC3-12800 speed with CL11 latency at 1.5 V and implements 1Rx4 registered ECC. The registered buffer and error-correcting code are mandatory for the listed Supermicro platforms; unbuffered or non-ECC memory will not function in these boards.

Straightforward DIMM installation

Modules insert vertically into the 240-pin slots without tools or heat spreaders to obstruct adjacent components. The only common issue is mixing registered ECC with unbuffered DIMMs or populating slots in an order the motherboard manual does not support, which prevents the system from posting.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1600 CL11 matches qualified Supermicro X9 platforms
  • 5 V operation meets JEDEC standard for registered DIMMs
  • 240-pin RDIMM form factor fits X9SRG, X9SRH, X9SRi, X9SRL, X9SRW motherboards

Tekniset tiedot

BrandOWC
Part Number1R6D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9SRG Series
Supermicro Motherboard X9SRH Series
Supermicro Motherboard X9SRi Series
Supermicro Motherboard X9SRL Series
Supermicro Motherboard X9SRW Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the DDR3 1600 speed mean for my Supermicro X9SRG system?

The modules run at 1600 MT/s with CL11 timing on a DDR3 platform, delivering the rated throughput for each populated slot.

What does the PC3-12800 rating cap in practice?

PC3-12800 is the JEDEC DDR3-1600 standard; the kit will operate at that speed on the listed X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards.

What physical slot and clearance do these 240-pin RDIMMs need?

Each module is a 240-pin DDR3 RDIMM without a heat spreader, so it fits standard DDR3 DIMM sockets on the compatible Supermicro boards.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.