Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green DDR3 ECC registered DIMMs in anti-static packaging

OWC

OWC 32GB (4x8GB) DDR3 1600 CL11 ECC Registered RDIMM X9SRG X9SRH X9SRi X9SRL X9SRW memory upgrade

SKU CH-WRC1-4F4Y6

A 32 GB kit of four 8 GB DDR3 1600 CL11 ECC registered RDIMMs for Supermicro X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1600 CL11 matches qualified Supermicro X9 platforms
  • 5 V operation meets JEDEC standard for registered DIMMs
  • 240-pin RDIMM form factor fits X9SRG, X9SRH, X9SRi, X9SRL, X9SRW motherboards

Server-grade DDR3 ECC RDIMM kit

This 32 GB kit contains four 8 GB DDR3 1600 modules built for Supermicro X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards. It targets administrators upgrading workstations, servers, NAS units or routers that require registered ECC memory. Standard desktop systems cannot use these modules.

Registered ECC with 1Rx4 organisation

Each 240-pin DIMM runs at PC3-12800 speed with CL11 latency at 1.5 V and implements 1Rx4 registered ECC. The registered buffer and error-correcting code are mandatory for the listed Supermicro platforms; unbuffered or non-ECC memory will not function in these boards.

Straightforward DIMM installation

Modules insert vertically into the 240-pin slots without tools or heat spreaders to obstruct adjacent components. The only common issue is mixing registered ECC with unbuffered DIMMs or populating slots in an order the motherboard manual does not support, which prevents the system from posting.

Prednosti

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1600 CL11 matches qualified Supermicro X9 platforms
  • 5 V operation meets JEDEC standard for registered DIMMs
  • 240-pin RDIMM form factor fits X9SRG, X9SRH, X9SRi, X9SRL, X9SRW motherboards

Špecifikácie

BrandOWC
Part Number1R6D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9SRG Series
Supermicro Motherboard X9SRH Series
Supermicro Motherboard X9SRi Series
Supermicro Motherboard X9SRL Series
Supermicro Motherboard X9SRW Series

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What does the DDR3 1600 speed mean for my Supermicro X9SRG system?

The modules run at 1600 MT/s with CL11 timing on a DDR3 platform, delivering the rated throughput for each populated slot.

What does the PC3-12800 rating cap in practice?

PC3-12800 is the JEDEC DDR3-1600 standard; the kit will operate at that speed on the listed X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards.

What physical slot and clearance do these 240-pin RDIMMs need?

Each module is a 240-pin DDR3 RDIMM without a heat spreader, so it fits standard DDR3 DIMM sockets on the compatible Supermicro boards.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.