Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR3 ECC registered DIMMs in anti-static packaging

OWC

OWC 32GB (4x8GB) DDR3 1600 CL11 ECC Registered RDIMM X9SRG X9SRH X9SRi X9SRL X9SRW memory upgrade

SKU CH-WRC1-4F4Y6

A 32 GB kit of four 8 GB DDR3 1600 CL11 ECC registered RDIMMs for Supermicro X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1600 CL11 matches qualified Supermicro X9 platforms
  • 5 V operation meets JEDEC standard for registered DIMMs
  • 240-pin RDIMM form factor fits X9SRG, X9SRH, X9SRi, X9SRL, X9SRW motherboards

Server-grade DDR3 ECC RDIMM kit

This 32 GB kit contains four 8 GB DDR3 1600 modules built for Supermicro X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards. It targets administrators upgrading workstations, servers, NAS units or routers that require registered ECC memory. Standard desktop systems cannot use these modules.

Registered ECC with 1Rx4 organisation

Each 240-pin DIMM runs at PC3-12800 speed with CL11 latency at 1.5 V and implements 1Rx4 registered ECC. The registered buffer and error-correcting code are mandatory for the listed Supermicro platforms; unbuffered or non-ECC memory will not function in these boards.

Straightforward DIMM installation

Modules insert vertically into the 240-pin slots without tools or heat spreaders to obstruct adjacent components. The only common issue is mixing registered ECC with unbuffered DIMMs or populating slots in an order the motherboard manual does not support, which prevents the system from posting.

Přednosti

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands workstation capacity
  • DDR3 1600 CL11 matches qualified Supermicro X9 platforms
  • 5 V operation meets JEDEC standard for registered DIMMs
  • 240-pin RDIMM form factor fits X9SRG, X9SRH, X9SRi, X9SRL, X9SRW motherboards

Specifikace

BrandOWC
Part Number1R6D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9SRG Series
Supermicro Motherboard X9SRH Series
Supermicro Motherboard X9SRi Series
Supermicro Motherboard X9SRL Series
Supermicro Motherboard X9SRW Series

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the DDR3 1600 speed mean for my Supermicro X9SRG system?

The modules run at 1600 MT/s with CL11 timing on a DDR3 platform, delivering the rated throughput for each populated slot.

What does the PC3-12800 rating cap in practice?

PC3-12800 is the JEDEC DDR3-1600 standard; the kit will operate at that speed on the listed X9SRG, X9SRH, X9SRi, X9SRL and X9SRW motherboards.

What physical slot and clearance do these 240-pin RDIMMs need?

Each module is a 240-pin DDR3 RDIMM without a heat spreader, so it fits standard DDR3 DIMM sockets on the compatible Supermicro boards.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.