Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 32GB (2x16GB) DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM for Dell PowerVault NX400

SKU CH-BND7-X6BV2

32 GB dual-rank DDR3L ECC registered kit at 1600 MHz for Dell PowerVault NX400 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2×16 GB) expands Dell PowerVault NX400 capacity
  • DDR3L 1600 PC3L-12800 CL11 matches system specifications
  • 35 V low-voltage modules reduce power draw
  • Replaces Dell part numbers A6761613, A6994465, A7515505, A8255125, SNP20D6FC/16G

System-specific ECC RDIMM kit

This 32 GB kit contains two 16 GB DDR3L 1600 modules built to PC3L-12800 CL11 timings. The memory is ECC registered and operates at 1.35 V in a 240-pin RDIMM form factor. It is designed specifically for the Dell PowerVault NX400 storage server.

Verify registered ECC support

Confirm that your NX400 currently runs registered ECC DDR3L memory before ordering. This kit will not work in systems that require unbuffered non-ECC modules or a different voltage. Mixing registered and unbuffered DIMMs is not supported and will prevent the server from booting.

Fits Dell PowerVault NX400 slots

The two 240-pin RDIMMs install directly into the NX400 memory slots without adapters. ECC registered operation helps maintain data integrity for storage workloads. The 1.35 V DDR3L voltage matches the platform specification and keeps power draw within the original design envelope.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2×16 GB) expands Dell PowerVault NX400 capacity
  • DDR3L 1600 PC3L-12800 CL11 matches system specifications
  • 35 V low-voltage modules reduce power draw
  • Replaces Dell part numbers A6761613, A6994465, A7515505, A8255125, SNP20D6FC/16G

Tekniset tiedot

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerVault NX400

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the OWC 32GB kit include only the two 16GB DDR3L RDIMMs or are any tools or cables supplied?

The kit contains two 16GB DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC registered RDIMMs. No tools, cables or additional hardware are included.

Should I choose this 32GB 2Rx4 registered kit or look for a different rank or unbuffered version for the PowerVault NX400?

The PowerVault NX400 requires ECC registered memory. This 2Rx4 DDR3L 1600 kit matches the Dell part numbers A6761613, A6994465, A7515505, A8255125 and SNP20D6FC/16G, so it is the correct version.

What does the PC3L-12800 1600MHz CL11 rating actually deliver once the modules are installed in the NX400?

The modules run at 1600 MT/s with CAS latency 11 at 1.35 V, providing 32 GB of ECC registered capacity that the NX400 can address for error-corrected server workloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.