Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

OWC

OWC 32GB (2x16GB) DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM for Dell PowerVault NX400

SKU CH-BND7-X6BV2

32 GB dual-rank DDR3L ECC registered kit at 1600 MHz for Dell PowerVault NX400 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2×16 GB) expands Dell PowerVault NX400 capacity
  • DDR3L 1600 PC3L-12800 CL11 matches system specifications
  • 35 V low-voltage modules reduce power draw
  • Replaces Dell part numbers A6761613, A6994465, A7515505, A8255125, SNP20D6FC/16G

System-specific ECC RDIMM kit

This 32 GB kit contains two 16 GB DDR3L 1600 modules built to PC3L-12800 CL11 timings. The memory is ECC registered and operates at 1.35 V in a 240-pin RDIMM form factor. It is designed specifically for the Dell PowerVault NX400 storage server.

Verify registered ECC support

Confirm that your NX400 currently runs registered ECC DDR3L memory before ordering. This kit will not work in systems that require unbuffered non-ECC modules or a different voltage. Mixing registered and unbuffered DIMMs is not supported and will prevent the server from booting.

Fits Dell PowerVault NX400 slots

The two 240-pin RDIMMs install directly into the NX400 memory slots without adapters. ECC registered operation helps maintain data integrity for storage workloads. The 1.35 V DDR3L voltage matches the platform specification and keeps power draw within the original design envelope.

I korthet

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2×16 GB) expands Dell PowerVault NX400 capacity
  • DDR3L 1600 PC3L-12800 CL11 matches system specifications
  • 35 V low-voltage modules reduce power draw
  • Replaces Dell part numbers A6761613, A6994465, A7515505, A8255125, SNP20D6FC/16G

Specifikationer

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerVault NX400

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the OWC 32GB kit include only the two 16GB DDR3L RDIMMs or are any tools or cables supplied?

The kit contains two 16GB DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC registered RDIMMs. No tools, cables or additional hardware are included.

Should I choose this 32GB 2Rx4 registered kit or look for a different rank or unbuffered version for the PowerVault NX400?

The PowerVault NX400 requires ECC registered memory. This 2Rx4 DDR3L 1600 kit matches the Dell part numbers A6761613, A6994465, A7515505, A8255125 and SNP20D6FC/16G, so it is the correct version.

What does the PC3L-12800 1600MHz CL11 rating actually deliver once the modules are installed in the NX400?

The modules run at 1600 MT/s with CAS latency 11 at 1.35 V, providing 32 GB of ECC registered capacity that the NX400 can address for error-corrected server workloads.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.