Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 ECC registered DIMMs with gold contacts

OWC

OWC 32GB (2x16GB) DDR4 2933 CL21 ECC RDIMM PowerEdge C4140

SKU CH-H12K-WDQ7C

32 GB DDR4 ECC registered DIMM kit, 2 × 16 GB at 2933 MHz CL21, 1.2 V, 288-pin, for PowerEdge C4140 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB (2 x 16GB)

Näytä 4 muuta kokoonpanoa
  • ECC registered design prevents data corruption in servers
  • 32 GB kit (2 × 16 GB) doubles capacity for virtualization
  • DDR4 2933 CL21 at 1.2 V balances speed and efficiency
  • JEDEC-standard 288-pin RDIMM fits PowerEdge C4140 slots
  • Backward compatible with 2133, 2400 and 2666 MHz systems

PowerEdge C4140 DDR4 ECC RDIMM Kit

This 32GB kit contains two 16GB DDR4 2933 modules built to JEDEC PC4-23400 CL21 specifications. The 288-pin registered DIMMs operate at 1.2V and include ECC error correction for data integrity. They are validated specifically for the PowerEdge C4140 platform with SkyLake CPUs.

Server and workstation upgrades only

The modules suit administrators expanding memory in a compatible Dell PowerEdge C4140 or similar registered-ECC platform. They will not work in standard desktop boards, consumer laptops or any system that requires unbuffered or load-reduced DIMMs. Buyers needing non-ECC memory should look elsewhere.

Ready-to-install dual-module kit

The package delivers a matched pair so the server can populate two slots immediately without mixing ranks or speeds. Backward compatibility with 2133, 2400 and 2666MHz buses allows the kit to clock down automatically if the platform demands it. No heat spreaders are included, relying on system airflow for cooling.

Kohokohdat

  • ECC registered design prevents data corruption in servers
  • 32 GB kit (2 × 16 GB) doubles capacity for virtualization
  • DDR4 2933 CL21 at 1.2 V balances speed and efficiency
  • JEDEC-standard 288-pin RDIMM fits PowerEdge C4140 slots
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Tekniset tiedot

BrandOWC
Part Number2R9D42R4032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemPowerEdge C4140 (SkyLake CPU)

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What server must I already have for this 288-pin ECC registered kit to install correctly?

The modules are validated for the PowerEdge C4140 with a SkyLake CPU and will not work in standard desktop systems.

Can I keep my existing 2133 MHz or 2400 MHz DDR4 ECC registered DIMMs and add this 2933 MHz kit alongside them?

Yes, the kit is backward compatible with 2133 MHz, 2400 MHz and 2666 MHz ECC registered memory, though all modules will run at the speed of the slowest installed DIMM.

How do I confirm the 32 GB kit is running at 2933 MHz with ECC active after installation?

Check the system BIOS or a hardware utility such as IPMI; it should report 32 GB total, 2933 MT/s data rate, CL21 timings, 1.2 V and ECC registered mode enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.