Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 32GB DDR3L 1600 PC3L-12800 CL11 4Rx4 ECC RDIMM 1R6T34R432GB

SKU CH-980D-TFPQE

A 32GB DDR3L 1600 ECC registered DIMM for Supermicro SuperServer 2027, 2028 and 4027 series

  • Capacity32GB
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • 32GB single module expands server memory capacity
  • DDR3L 1600 speed with CL11 latency boosts throughput
  • ECC registered design protects data integrity in critical workloads
  • 35V low-voltage operation reduces system power draw
  • Validated for Supermicro SuperServer 2027, 2028 and 4027 series

Server ECC RDIMM

This 32GB DDR3L module runs at 1600 MT/s with CL11 latency and 1.35V operation. It uses a 240-pin registered design with ECC and a 4Rx4 organisation. The part is validated for Supermicro SuperServer 2027PR, 2027R, 2027TR, 2028UT and 4027GR systems.

Workstation and server upgrades only

The registered ECC architecture makes this module suitable for Supermicro SuperServer platforms that require buffered memory with error correction. It will not function in standard desktop boards that accept only unbuffered non-ECC DIMMs, nor in systems that cannot address 4Rx4 modules.

Single 32GB 4Rx4 registered module

One DIMM delivers the full 32GB capacity in a 4Rx4 configuration. Buyers needing a different rank layout, lower density per slot, or unbuffered memory must select another part.

Kohokohdat

  • 32GB single module expands server memory capacity
  • DDR3L 1600 speed with CL11 latency boosts throughput
  • ECC registered design protects data integrity in critical workloads
  • 35V low-voltage operation reduces system power draw
  • Validated for Supermicro SuperServer 2027, 2028 and 4027 series

Tekniset tiedot

BrandOWC
Part Number1R6T34R432GB
Capacity32GB
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 2027PR Series
Supermicro SuperServer 2027R Series
Supermicro SuperServer 2027TR Series
Supermicro SuperServer 2028UT Series
Supermicro SuperServer 4027GR Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 240-pin DDR3L ECC RDIMM in a Supermicro SuperServer 2027PR, and what step is often missed?

Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 32GB module is recognised at 1600 MHz with ECC enabled.

What maintenance or replacement will the 32GB DDR3L 1600 module need over its service life?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.35V, so keep server airflow clean and replace only if memory diagnostics report correctable ECC errors that exceed the platform threshold.

What limit appears first when the 4Rx4 registered DIMM runs sustained workloads in a 2028UT series server?

The memory controller’s maximum supported rank per channel is reached first; the 4Rx4 organisation consumes four ranks per module, so total capacity is capped by the platform’s rank limit before bandwidth or thermal limits become binding.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.