OWC 32GB (4x8GB) DDR3L 1600 CL11 ECC RDIMM SuperBlade 7127R 7142G 7427R
- 32GB (4 x 8GB)
- 240-Pin DDR3L ECC R…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB dual-channel DDR3L 1600 CL11 ECC registered RDIMM kit for Supermicro SuperBlade 7127, 7142 and 7427 series servers
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR3L 1600 CL11 registered DIMMs built for Supermicro SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R systems. It is designed for servers and workstations that require ECC error correction and registered buffering. Standard desktop computers cannot use this memory.
Before ordering, confirm the blade chassis has 240-pin DDR3L DIMM slots and that the system BIOS accepts registered ECC modules. This memory will not work in unbuffered consumer platforms and cannot be mixed with non-ECC or unbuffered DIMMs. Check the Supermicro qualified vendor list for exact population rules.
Operating at 1.35V, these modules draw less power than standard DDR3 and generate modest heat under typical server loads. No heat spreader is fitted, so airflow through the blade enclosure handles cooling. Acoustic impact is negligible because the memory itself has no moving parts.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperBlade 7127R Series Supermicro SuperBlade 7127RG Series Supermicro SuperBlade 7127RG3 Series Supermicro SuperBlade 7142G Series Supermicro SuperBlade 7427R Series |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit contains two 16 GB DDR3L 1600 CL11 2Rx4 240-pin 1.35 V ECC Registered RDIMM modules. No extra parts are required for installation in a compatible Supermicro SuperBlade server.
This 32 GB kit (2 × 16 GB) is the only capacity offered under part number 1R6T32R4032P; select it when you need a matched pair of 16 GB registered ECC modules for those SuperBlade models.
PC3L-12800 indicates a peak transfer rate of 12 800 MB/s at 1 600 MHz with CL11 latency at 1.35 V, delivering registered ECC bandwidth for the supported SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R series.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?