暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3L ECC registered DIMMs, 240-pin, no heat spreader

OWC

OWC 1R6T32R4032P 32GB (2x16GB) DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM memory upgrade

SKU CH-4RRT-9QMNB

32 GB dual-channel DDR3L 1600 CL11 ECC registered RDIMM kit for Supermicro SuperBlade 7127, 7142 and 7427 series servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • 32GB dual-channel kit doubles server memory capacity
  • DDR3L 1600 CL11 timing matches Supermicro blade specs
  • 35V low-voltage DDR3L cuts power draw per module
  • ECC registered 2Rx4 design protects data integrity in workloads
  • 240-pin RDIMM form factor fits 7127R, 7127RG, 7127RG3, 7142G, 7427R blades

32GB DDR3L ECC Registered kit for Supermicro

This 32GB kit contains two 16GB DDR3L 1600 CL11 registered DIMMs built for Supermicro SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R systems. It is designed for servers and workstations that require ECC error correction and registered buffering. Standard desktop computers cannot use this memory.

Verify 240-pin DDR3L slots

Before ordering, confirm the blade chassis has 240-pin DDR3L DIMM slots and that the system BIOS accepts registered ECC modules. This memory will not work in unbuffered consumer platforms and cannot be mixed with non-ECC or unbuffered DIMMs. Check the Supermicro qualified vendor list for exact population rules.

Low-voltage DDR3L runs at 1.35V without a heat

Operating at 1.35V, these modules draw less power than standard DDR3 and generate modest heat under typical server loads. No heat spreader is fitted, so airflow through the blade enclosure handles cooling. Acoustic impact is negligible because the memory itself has no moving parts.

特長

  • 32GB dual-channel kit doubles server memory capacity
  • DDR3L 1600 CL11 timing matches Supermicro blade specs
  • 35V low-voltage DDR3L cuts power draw per module
  • ECC registered 2Rx4 design protects data integrity in workloads
  • 240-pin RDIMM form factor fits 7127R, 7127RG, 7127RG3, 7142G, 7427R blades

仕様

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7127R Series
Supermicro SuperBlade 7127RG Series
Supermicro SuperBlade 7127RG3 Series
Supermicro SuperBlade 7142G Series
Supermicro SuperBlade 7427R Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the box and is anything else needed to install it?

The kit contains two 16 GB DDR3L 1600 CL11 2Rx4 240-pin 1.35 V ECC Registered RDIMM modules. No extra parts are required for installation in a compatible Supermicro SuperBlade server.

Which capacity version should I choose for my SuperBlade 7127R or 7427R?

This 32 GB kit (2 × 16 GB) is the only capacity offered under part number 1R6T32R4032P; select it when you need a matched pair of 16 GB registered ECC modules for those SuperBlade models.

What does the PC3L-12800 rating mean once the memory is running in my server?

PC3L-12800 indicates a peak transfer rate of 12 800 MB/s at 1 600 MHz with CL11 latency at 1.35 V, delivering registered ECC bandwidth for the supported SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R series.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。