Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 512GB (4x128GB) DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC RDIMM Kit for Dell PowerEdge HS5610 HS5620

SKU CH-94AV-YH2QS

512 GB DDR5 ECC registered kit of four 128 GB modules at 4800 MT/s CL40 for Dell PowerEdge HS5610 and HS5620 servers

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes
  • 512 GB total capacity from four 128 GB modules for heavy workloads
  • DDR5 4800 speed with CL40 latency for responsive server performance
  • ECC registered design detects and corrects data errors in critical tasks
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge HS5610 and HS5620 systems

Dell PowerEdge HS5610 HS5620 memory kit

This 512 GB kit contains four 128 GB DDR5 4800 ECC registered RDIMMs built for Dell PowerEdge HS5610 and HS5620 servers. It runs at 1.1 V with CL40 latency and a 4Rx4 organisation. The modules are JEDEC compliant and carry no heat spreader. They are intended for workstation, server and NAS platforms that require registered ECC memory.

Installing registered ECC RDIMMs

Installation follows standard 288-pin DIMM procedure: power down, open the chassis, align the notch and press until the latches click. The kit will not work in standard desktop boards that accept only unbuffered memory. Mixing these registered modules with unbuffered or load-reduced ECC DIMMs is unsupported and will prevent boot. No extra tools or firmware steps are required beyond the server’s normal memory configuration utility.

Suited for Dell PowerEdge HS5610 and HS5620 upgrades

This kit suits administrators expanding memory in the listed PowerEdge models or building new configurations that specify DDR5 4800 registered ECC. It is not for desktop PCs, laptops or any system that requires unbuffered or load-reduced memory. Buyers needing different capacities, speeds or form factors should look at other system-specific kits.

Kohokohdat

  • 512 GB total capacity from four 128 GB modules for heavy workloads
  • DDR5 4800 speed with CL40 latency for responsive server performance
  • ECC registered design detects and corrects data errors in critical tasks
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge HS5610 and HS5620 systems

Tekniset tiedot

BrandOWC
Part Number4R8D54R4512S
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge HS5610
Dell PowerEdge HS5620

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the 4Rx4 ECC RDIMM kit is operating correctly after installation?

Check the BIOS or iDRAC to verify all 512GB are detected at 4800MHz with CL40 timings and ECC registered status.

What is included in the box and what must be purchased separately?

The kit contains four 128GB DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC RDIMM modules. No additional parts are required.

Which capacity version should I choose for my Dell PowerEdge HS5610 or HS5620?

This 512GB kit (4 x 128GB) is the specific configuration validated for those servers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.