We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 ECC RDIMM modules in a row

OWC

OWC 512GB (4x128GB) DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC RDIMM Kit for Dell PowerEdge HS5610 HS5620

SKU CH-94AV-YH2QS

512 GB DDR5 ECC registered kit of four 128 GB modules at 4800 MT/s CL40 for Dell PowerEdge HS5610 and HS5620 servers

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 512GB (4 x 128GB)

  • 512 GB total capacity from four 128 GB modules for heavy workloads
  • DDR5 4800 speed with CL40 latency for responsive server performance
  • ECC registered design detects and corrects data errors in critical tasks
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge HS5610 and HS5620 systems

Dell PowerEdge HS5610 HS5620 memory kit

This 512 GB kit contains four 128 GB DDR5 4800 ECC registered RDIMMs built for Dell PowerEdge HS5610 and HS5620 servers. It runs at 1.1 V with CL40 latency and a 4Rx4 organisation. The modules are JEDEC compliant and carry no heat spreader. They are intended for workstation, server and NAS platforms that require registered ECC memory.

Installing registered ECC RDIMMs

Installation follows standard 288-pin DIMM procedure: power down, open the chassis, align the notch and press until the latches click. The kit will not work in standard desktop boards that accept only unbuffered memory. Mixing these registered modules with unbuffered or load-reduced ECC DIMMs is unsupported and will prevent boot. No extra tools or firmware steps are required beyond the server’s normal memory configuration utility.

Suited for Dell PowerEdge HS5610 and HS5620 upgrades

This kit suits administrators expanding memory in the listed PowerEdge models or building new configurations that specify DDR5 4800 registered ECC. It is not for desktop PCs, laptops or any system that requires unbuffered or load-reduced memory. Buyers needing different capacities, speeds or form factors should look at other system-specific kits.

Highlights

  • 512 GB total capacity from four 128 GB modules for heavy workloads
  • DDR5 4800 speed with CL40 latency for responsive server performance
  • ECC registered design detects and corrects data errors in critical tasks
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge HS5610 and HS5620 systems

Specifications

BrandOWC
Part Number4R8D54R4512S
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge HS5610
Dell PowerEdge HS5620

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the 4Rx4 ECC RDIMM kit is operating correctly after installation?

Check the BIOS or iDRAC to verify all 512GB are detected at 4800MHz with CL40 timings and ECC registered status.

What is included in the box and what must be purchased separately?

The kit contains four 128GB DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC RDIMM modules. No additional parts are required.

Which capacity version should I choose for my Dell PowerEdge HS5610 or HS5620?

This 512GB kit (4 x 128GB) is the specific configuration validated for those servers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.