Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green 288-pin DDR4 RDIMM modules with black chips no heat spreader

OWC

OWC 512GB (8x64GB) DDR4 2933MHz ECC Registered RDIMM server RAM

SKU CH-G0TX-QHTRN

Eight 64 GB DDR4 2933 MHz ECC registered RDIMMs totalling 512 GB for servers and workstations

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 512GB (8 x 64GB)

Näytä 4 muuta kokoonpanoa

Rank 2Rx4

  • 512 GB total capacity from eight 64 GB modules
  • DDR4 2933 MHz speed with CL21 latency for responsive server performance
  • ECC registered design detects and corrects data errors in critical workloads
  • JEDEC and RoHS compliant for warranty-safe upgrades across vendors
  • Backward compatible with 2133, 2400 and 2666 MHz systems

512GB DDR4 2933MHz ECC Registered RDIMM kit

This kit provides 512GB of DDR4 2933MHz ECC registered memory across eight 64GB modules. It is built for servers, workstations and NAS systems that require registered DIMMs with error correction. Standard desktop platforms cannot use this memory and it must not be mixed with unbuffered modules.

Sustained throughput at 2933MHz with CL21 latency

Each module runs at 2933MHz with a CAS latency of 21 cycles and operates at 1.2V. The registered design adds a clock cycle of buffering to stabilise the command bus under heavy, continuous workloads. Backward compatibility allows operation at 2133MHz, 2400MHz or 2666MHz when the platform requires a lower speed.

Passive modules draw 1.2V with no onboard cooling

The 288-pin RDIMMs have no heat spreader and rely on system airflow for thermal management. At the rated 1.2V the modules run cool and silent, making them suitable for densely populated server chassis where fan noise and power draw must stay low.

Kohokohdat

  • 512 GB total capacity from eight 64 GB modules
  • DDR4 2933 MHz speed with CL21 latency for responsive server performance
  • ECC registered design detects and corrects data errors in critical workloads
  • JEDEC and RoHS compliant for warranty-safe upgrades across vendors
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Tekniset tiedot

BrandOWC
Part Number2R9D42R4512K
Capacity512GB (8 x 64GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power do the 1.2V DDR4 2933MHz modules draw when the server runs continuously?

Each 64GB RDIMM operates at 1.2V, the standard DDR4 voltage, so total power scales with the eight modules installed and the platform's memory controller efficiency.

What must the system already support for this 8×64GB ECC registered kit to function?

The motherboard needs 288-pin DDR4 slots that accept ECC registered RDIMMs, a CPU and chipset qualified for 2Rx4 64GB density, and BIOS support for 512GB total capacity.

Will these CL21 2933MHz sticks run stably alongside existing 2133MHz or 2400MHz DDR4 ECC RDIMMs?

The modules are backward compatible with 2133MHz, 2400MHz and 2666MHz speeds; the system will clock all populated slots to the lowest common frequency and matching timings.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.