OWC 64GB DDR5 5600 CL46 2Rx4 ECC Registered DIMM memory upgrade
- 64GB
- 288-Pin DDR5 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 64 GB DDR5 5600 ECC registered RDIMM for compatible Supermicro SuperServer workstations and servers
Capacity 64GB
This OWC 64GB DDR5 5600 ECC Registered RDIMM is built for Supermicro SuperServer SYS-121C-TN2R, SYS-121H-TNR, SYS-211E-FRDN13P, SYS-211E-FRDN2T and SYS-211E-FRN13P systems. It targets administrators who need to expand memory capacity in compatible workstation or server platforms.
The 64GB dual-rank module upgrades from smaller DIMMs when the platform supports DDR5 5600 PC5-44800 CL46 at 1.1V. The jump is worth it when workloads demand higher density per slot and the server qualifies registered ECC memory.
Confirm the exact SuperServer model matches the listed SYS-121 or SYS-211 part numbers before ordering. This registered ECC RDIMM will not work in standard desktop computers and cannot be mixed with unbuffered or load-reduced memory types.
| Brand | OWC |
|---|---|
| Part Number | 5R6D52R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperServer SYS-121C-TN2R Supermicro SuperServer SYS-121H-TNR Supermicro SuperServer SYS-211E-FRDN13P Supermicro SuperServer SYS-211E-FRDN2T Supermicro SuperServer SYS-211E-FRN13P |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module uses a 288-pin DDR5 RDIMM form factor, so the server must provide a matching 288-pin DDR5 DIMM slot.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 5600 MHz speed and ECC are active — skipping the BIOS check is the common oversight.
No scheduled maintenance is needed; keep the server air filters clean so the 1.1 V module stays within thermal limits, and replace the DIMM only if memory diagnostics report correctable or uncorrectable ECC errors.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?