OWC 64GB DDR5 5600 CL46 2Rx4 ECC Registered DIMM memory upgrade
- 64GB
- 288-Pin DDR5 ECC RD…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
A 64 GB DDR5 5600 ECC registered RDIMM for compatible Supermicro SuperServer workstations and servers
Capacity 64GB
This OWC 64GB DDR5 5600 ECC Registered RDIMM is built for Supermicro SuperServer SYS-121C-TN2R, SYS-121H-TNR, SYS-211E-FRDN13P, SYS-211E-FRDN2T and SYS-211E-FRN13P systems. It targets administrators who need to expand memory capacity in compatible workstation or server platforms.
The 64GB dual-rank module upgrades from smaller DIMMs when the platform supports DDR5 5600 PC5-44800 CL46 at 1.1V. The jump is worth it when workloads demand higher density per slot and the server qualifies registered ECC memory.
Confirm the exact SuperServer model matches the listed SYS-121 or SYS-211 part numbers before ordering. This registered ECC RDIMM will not work in standard desktop computers and cannot be mixed with unbuffered or load-reduced memory types.
| Brand | OWC |
|---|---|
| Part Number | 5R6D52R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperServer SYS-121C-TN2R Supermicro SuperServer SYS-121H-TNR Supermicro SuperServer SYS-211E-FRDN13P Supermicro SuperServer SYS-211E-FRDN2T Supermicro SuperServer SYS-211E-FRN13P |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The module uses a 288-pin DDR5 RDIMM form factor, so the server must provide a matching 288-pin DDR5 DIMM slot.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 5600 MHz speed and ECC are active — skipping the BIOS check is the common oversight.
No scheduled maintenance is needed; keep the server air filters clean so the 1.1 V module stays within thermal limits, and replace the DIMM only if memory diagnostics report correctable or uncorrectable ECC errors.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม