OWC 32GB DDR5 5600 ECC Registered RDIMM memory upgrade
- 32GB
- 288-Pin DDR5 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR5 5600 ECC registered RDIMM for Gigabyte G293-S42, G293-S43, G293-S45, G293-S46 and G293-S47 servers
This OWC 32GB DDR5 5600 CL46 module is a registered ECC RDIMM built for Gigabyte G293-S42, G293-S43, G293-S45, G293-S46 and G293-S47 servers. It runs at 1.1V with a 2Rx8 organisation and conforms to JEDEC PC5-44800 specifications for workstation and server platforms.
It fits administrators upgrading or repairing the listed Gigabyte 293-series systems that require registered ECC memory. It will not work in standard desktop boards, consumer laptops or any system that accepts only unbuffered or load-reduced DIMMs.
The module is a 288-pin DDR5 RDIMM with on-die ECC and register logic; the platform must explicitly support registered ECC DDR5 at 5600 MT/s. If the motherboard manual calls for unbuffered or LRDIMM memory this part will not post.
| Brand | OWC |
|---|---|
| Part Number | 5R6D52R832GB |
| Capacity | 32GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Gigabyte G293-S42 Gigabyte G293-S43 Gigabyte G293-S45 Gigabyte G293-S46 Gigabyte G293-S47 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 5600 MT/s speed and ECC registered mode are active; the step often missed is confirming the registered ECC setting in firmware after the physical install.
The module has no heat spreader and no moving parts, so no routine maintenance is required; replacement is only needed if a correctable error count rises above the platform threshold or if a capacity upgrade is desired later.
The JEDEC-standard 1.1 V operating voltage and CL46 latency define the thermal and timing envelope; under continuous load the memory controller’s thermal throttling point will be reached before the module exceeds its rated specifications.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?