OWC 32GB DDR5 5600 ECC Registered RDIMM memory upgrade
- 32GB
- 288-Pin DDR5 ECC RD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
32 GB DDR5 5600 ECC registered RDIMM for Gigabyte G293-S42, G293-S43, G293-S45, G293-S46 and G293-S47 servers
This OWC 32GB DDR5 5600 CL46 module is a registered ECC RDIMM built for Gigabyte G293-S42, G293-S43, G293-S45, G293-S46 and G293-S47 servers. It runs at 1.1V with a 2Rx8 organisation and conforms to JEDEC PC5-44800 specifications for workstation and server platforms.
It fits administrators upgrading or repairing the listed Gigabyte 293-series systems that require registered ECC memory. It will not work in standard desktop boards, consumer laptops or any system that accepts only unbuffered or load-reduced DIMMs.
The module is a 288-pin DDR5 RDIMM with on-die ECC and register logic; the platform must explicitly support registered ECC DDR5 at 5600 MT/s. If the motherboard manual calls for unbuffered or LRDIMM memory this part will not post.
| Brand | OWC |
|---|---|
| Part Number | 5R6D52R832GB |
| Capacity | 32GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Gigabyte G293-S42 Gigabyte G293-S43 Gigabyte G293-S45 Gigabyte G293-S46 Gigabyte G293-S47 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 5600 MT/s speed and ECC registered mode are active; the step often missed is confirming the registered ECC setting in firmware after the physical install.
The module has no heat spreader and no moving parts, so no routine maintenance is required; replacement is only needed if a correctable error count rises above the platform threshold or if a capacity upgrade is desired later.
The JEDEC-standard 1.1 V operating voltage and CL46 latency define the thermal and timing envelope; under continuous load the memory controller’s thermal throttling point will be reached before the module exceeds its rated specifications.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟