Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 64GB DDR4 3200 CL22 ECC Registered RDIMM memory upgrade

SKU CH-J210-527EK

64GB DDR4 3200 ECC registered RDIMM for compatible Gigabyte server and workstation boards

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS Latency22
  • Voltage1.2V
  • ECCYes

Capacity 64GB

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • 64 GB single module doubles server capacity
  • DDR4 3200 CL22 delivers high-throughput bandwidth
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • Validated for Gigabyte H252-Z12 H261-Z60 H261-Z61 H262-NO0 H262-NO1

Server-grade ECC RDIMM

This 64GB DDR4 3200 CL22 ECC Registered RDIMM is built for workstations and servers that require registered memory with error correction. It is not compatible with standard desktop computers or with unbuffered or load-reduced modules. The module targets administrators upgrading compatible Gigabyte server platforms.

288-pin registered form factor

The module uses a 288-pin DDR4 ECC RDIMM form factor operating at 1.2V with a 2Rx4 rank configuration and no heat spreader. It fits the Gigabyte H252-Z12, H261-Z60, H261-Z61, H262-NO0 and H262-NO1 systems and is JEDEC-standard and RoHS compliant for warranty-safe installation.

JEDEC-standard thermals and power

Running at the JEDEC-standard 1.2V, the module draws nominal power and generates heat within specification for registered server DIMMs. Backward compatibility with 2133, 2400, 2666 and 2933MHz speeds allows it to operate at lower frequencies when the platform requires it, keeping thermals and noise at standard server levels.

Kohokohdat

  • 64 GB single module doubles server capacity
  • DDR4 3200 CL22 delivers high-throughput bandwidth
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • Validated for Gigabyte H252-Z12 H261-Z60 H261-Z61 H262-NO0 H262-NO1

Tekniset tiedot

BrandOWC
Part Number3R2D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS Latency22
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemGigabyte H252-Z12
Gigabyte H261-Z60
Gigabyte H261-Z61
Gigabyte H262-NO0
Gigabyte H262-NO1

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR4 standard and speed does this PC4-25600 CL22 module run at?

It operates at the JEDEC DDR4 3200 standard (PC4-25600) with CAS latency 22 and will down-clock to 2933, 2666, 2400 or 2133 MHz if the platform requires it.

Which physical slot and form factor does this 288-pin ECC Registered RDIMM require?

It needs a standard 288-pin DDR4 DIMM slot on a server or workstation board; it will not fit desktop UDIMM slots and cannot be mixed with unbuffered or load-reduced modules.

How is the single 64 GB 2Rx4 stick installed, and what step do builders often miss?

Power down, open the chassis, align the key notch with the 288-pin slot, press firmly until both latches click, then verify in BIOS that the channel registers 64 GB at 1.2 V and ECC is enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.