Phanteks PH-F140D30R_DRGB_PWM_BK01_3P 140mm 30mm DRGB PWM case fan 3-pack
- 3 Fans
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Phanteks
Three 120 mm thick-case fans with DRGB lighting, fluid-dynamic bearings and a 250-2000 RPM range delivering up to 64.3 CFM at 30.2 dB(A)
Fan Size 120mm
Style Regular
Option Triple Fans
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This set contains three 120mm case fans with a 30mm thickness designed for standard case mounting. Each fan uses a fluid dynamic bearing and a 4-pin PWM connector for automatic speed control. The white matte blades and black frames are illuminated by addressable DRGB LEDs.
Builders who need thin 25mm fans for tight radiator clearances or non-PWM voltage control should look elsewhere. The 30mm frame depth and PWM-only connector limit compatibility with those specific mounting scenarios.
The 30mm thickness determines whether the fans clear your radiator, heatsink or side-panel window. Measure the available space in your case before ordering; standard 25mm slots will not accommodate these units.
| Brand | Phanteks |
|---|---|
| Series | D30-120 |
| Model | D30-120, Black, 3 Pack |
| Part Number | PH-F120D30_DRGB_PWM_BK01_3P |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 30mm |
| Bearing Type | FDB (Fluid Dynamic Bearing) |
| RPM | 250-2000±10% RPM |
| Air Flow | Max. Airflow 64.3 CFM |
| Noise Level | 30.2 dB(A) |
| Power Connector | 4-Pin PWN |
| Color | White Matte blade / Black Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 30 mm |
| Lähetyspaino | 1.00 kg |
| Pakkauksen mitat | 183 × 127 × 102 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 4-pin PWM connector lets the motherboard control the fan speed precisely between 250 and 2000 RPM based on temperature.
Each fan measures 120 x 120 x 30 mm, so check that your case has at least 30 mm clearance at the mounting points.
Use the included DRGB cables to daisy-chain the three fans, then plug the lead into a 5 V addressable RGB header on the motherboard.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?