Phanteks PH-F140D30R_DRGB_PWM_BK01_3P 140mm 30mm DRGB PWM case fan 3-pack
- 3 Fans
- Case Fan
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Phanteks
Three 120 mm thick-case fans with DRGB lighting, fluid-dynamic bearings and a 250-2000 RPM range delivering up to 64.3 CFM at 30.2 dB(A)
Fan Size 120mm
Style Regular
Option Triple Fans
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
This set contains three 120mm case fans with a 30mm thickness designed for standard case mounting. Each fan uses a fluid dynamic bearing and a 4-pin PWM connector for automatic speed control. The white matte blades and black frames are illuminated by addressable DRGB LEDs.
Builders who need thin 25mm fans for tight radiator clearances or non-PWM voltage control should look elsewhere. The 30mm frame depth and PWM-only connector limit compatibility with those specific mounting scenarios.
The 30mm thickness determines whether the fans clear your radiator, heatsink or side-panel window. Measure the available space in your case before ordering; standard 25mm slots will not accommodate these units.
| Brand | Phanteks |
|---|---|
| Series | D30-120 |
| Model | D30-120, Black, 3 Pack |
| Part Number | PH-F120D30_DRGB_PWM_BK01_3P |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 30mm |
| Bearing Type | FDB (Fluid Dynamic Bearing) |
| RPM | 250-2000±10% RPM |
| Air Flow | Max. Airflow 64.3 CFM |
| Noise Level | 30.2 dB(A) |
| Power Connector | 4-Pin PWN |
| Color | White Matte blade / Black Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 30 mm |
| وزن الشحنة | 1.00 kg |
| أبعاد الطرد | 183 × 127 × 102 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The 4-pin PWM connector lets the motherboard control the fan speed precisely between 250 and 2000 RPM based on temperature.
Each fan measures 120 x 120 x 30 mm, so check that your case has at least 30 mm clearance at the mounting points.
Use the included DRGB cables to daisy-chain the three fans, then plug the lead into a 5 V addressable RGB header on the motherboard.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟