Phanteks PH-F140D30_DRGB_PWM_WT01_3P 140mm 30mm DRGB PWM case fan 3-pack
- 3 Fans
- Case Fan
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Phanteks
Three 140 mm, 30 mm thick case fans with fluid-dynamic bearings, 250-1800 RPM, 71.93 CFM max airflow and 29.5 dB(A) noise, plus addressable DRGB lighting and daisy-chain linking
Fan Size 140mm
Style Regular
Option Triple Fans
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
This pack contains three Phanteks D30-140 DRGB PWM fans, each 140 mm wide and 30 mm thick. The fluid-dynamic bearing spins from 250 to 1800 RPM, delivering up to 71.93 CFM at 29.5 dB(A). Black frames and integrated DRGB lighting suit radiators or restrictive mesh where extra frame depth helps push air through.
Your motherboard or fan controller must provide a 4-pin PWM header for each fan or a splitter that carries the PWM signal. Verify the case, radiator or mounting bracket can accommodate 30 mm thickness plus screw depth; standard 25 mm slots will not fit. The DRGB lighting requires a 5 V addressable RGB header or the included motherboard adapter.
Twelve UNC 6-32 and twelve M4 radiator screws (36 mm) cover most thick radiators, while twelve standard fan screws handle case mounting. Corner clips, bridge clips and screw covers let you link the three fans into a single visual and mechanical unit with one DRGB cable run. The DRGB motherboard adapter adds compatibility if your board lacks a 5 V ARGB header.
| Brand | Phanteks |
|---|---|
| Model | PH-F140D30_DRGB_PWM_BK01_3P |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 30mm |
| Bearing Type | Fluid Dynamic |
| RPM | 250-1800 +/- 10% RPM |
| Air Flow | 71.93 CFM Max |
| Noise Level | 29.5 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | DRGB |
| Dimensions | 140 x 140 x 30 mm / 5.51" x 5.51" x 1.18" |
| Package Contents | 3 x PH-F140D30_DRGB_PWM_WT01_3P 12 x Fan Screw 12 x UNC 6-32 Radiator Screw 36mm 12 x M4 Radiator Screw 36mm 2 x Corner Clip Cable, 6x Corner Clip 2 x Bridge Clip, 2xg Bridge Clip Connector 8 x Screw Cover Corner (4L, 4R) 4 x Screw Cover Bridge 1 x D-RGB M/B Adapter |
| وزن الشحنة | 1.36 kg |
| أبعاد الطرد | 196 × 143 × 100 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The package includes three 140 mm fans, 12 fan screws, 12 UNC 6-32 radiator screws, 12 M4 radiator screws, two corner clip cables, six corner clips, two bridge clips, two bridge clip connectors, eight screw cover corners, four screw cover bridges and one D-RGB motherboard adapter. No extra cables are required for daisy-chaining.
Choose regular airflow for intake or exhaust where air moves through the fan in the standard direction; choose reverse airflow when you want the blades to pull air the opposite way without hiding the D-RGB lighting effect.
At 1800 RPM the fans deliver up to 71.93 CFM; the 30 mm thick frame maintains higher static pressure so airflow drops less behind dense fins than with standard 25 mm fans.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟