Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three black 140mm PWM case fans with unified frames, daisy-chain connectors, and screw covers

Phanteks

Phanteks PH-F140M25_G2_BBK01_3P case fan 3x 140mm PWM black

SKU CH-2QZ4-BJ7F6 MPN PH-F140M25_G2_BBK01_3P

Three 140 mm PWM fans with daisy-chain frames, hydraulic bearings and up to 101.78 CFM airflow for radiators or case cooling

  • Fan Counts3 Fans
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic

Fan Size 140mm

Style Regular / No DRGB

Model M25 Gen2

  • M25 Gen2
  • M25
  • D30

Option Triple Fans

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Daisy-chain frame connects three fans with one PWM header
  • 78 CFM maximum airflow cools radiators and heatsinks effectively
  • 4 dBA maximum noise keeps system acoustics low
  • Hydraulic bearing supports 350–1800 RPM range for flexible speed control
  • Included screw covers and corner pieces give a clean finished look

Triple-pack 140 mm case fans

This set contains three Phanteks M25-140 Gen2 fans, each 140 mm square and 25 mm thick. They use a hydraulic bearing and a PWM four-pin connector for speed control between 350 and 1800 RPM. The black blades and frames have no integrated lighting, making them suited for builders who prefer a uniform dark aesthetic.

Daisy-chain frame eases installation

The unified fan frame lets each unit interlock with the next, so a single PWM header can drive the whole chain using the two included 500 mm extension cables. Fourteen mounting screws, eight corner screw covers and four bridge covers are supplied; fitting the covers after the fans are secured avoids misaligned holes. The only common snag is routing the daisy-chain cable behind a crowded motherboard tray.

Suits radiators and high-airflow builds

At 101.78 CFM and 2.23 mmH₂O peak pressure, these fans target water-cooling radiators and dense heatsinks where static pressure matters. The 36.4 dBA ceiling keeps noise moderate at full speed. Buyers who want addressable RGB lighting or a bundled fan controller should look elsewhere, as this pack provides neither.

Kohokohdat

  • Daisy-chain frame connects three fans with one PWM header
  • 78 CFM maximum airflow cools radiators and heatsinks effectively
  • 4 dBA maximum noise keeps system acoustics low
  • Hydraulic bearing supports 350–1800 RPM range for flexible speed control
  • Included screw covers and corner pieces give a clean finished look

Tekniset tiedot

BrandPhanteks
ModelM25-140 Gen2 Regular
Part NumberPH-F140M25_G2_BBK01_3P
Fan Counts3 Fans
Fan ControllerNo Controller
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM350-1800 +/- 10% RPM Max
Air Flow101.78 CFM Max
Air Pressure2.23 mmH2O Max
Noise Level36.4 dBA Max
Power ConnectorPWM, 2-Fase/4-poles
ColorBlack Fan Blade / Black Fan Frame
LEDNo DRGB
Dimensions140 x 140 x 25 mm
Package ContentsM25-140 Gen2 Fan: 3x
Fan Screws: 14x
500mm PWM Extension Cable: 2x
Screw Cover Corner: 8x (4xL, 4xR)
Screw Cover Bridge: 4x
Installation Guide: : 1x
Lähetyspaino0.93 kg
Pakkauksen mitat457 × 165 × 51 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I verify the fans are running at the correct speed after installation?

Use your motherboard BIOS or fan-control software to confirm each fan reports a PWM speed between 350 and 1800 RPM.

What comes in the triple pack and what must I supply myself?

The box contains three 140 mm fans, 14 mounting screws, two 500 mm PWM extension cables, eight screw-cover corners, four screw-cover bridges and an installation guide; you will need a PWM fan header on your motherboard or a separate fan hub.

Which version of the M25 Gen2 should I pick for a standard intake or exhaust setup?

Choose the regular airflow model in this pack; the reverse airflow variant is sold separately and is intended for specialised radiator push-pull configurations.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.