Phanteks PH-F140M25_G2_DWT01 140mm case fan white
- 1 Fan
- No Controller
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Phanteks
A 30 mm thick white 120 mm case fan with reverse airflow, DRGB lighting and PWM control delivers 61.5 CFM at 31.8 dB(A)
Fan Size 120mm
Style Reversed
Model D30
Option Single Fan
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The Phanteks D30-120 is a 120mm case fan with a 30mm thick frame designed for reverse airflow direction. It uses a fluid dynamic bearing and a 4-pin PWM connector for speed control between 250 and 2000 RPM. Integrated DRGB lighting illuminates the blades and frame in a white finish.
Builders mounting fans on radiators or behind dense dust filters benefit from the 30mm thickness, which delivers 61.5 CFM at 31.8 dB(A). The reverse airflow variant ensures the illuminated blade side faces the interior. Buyers needing standard airflow direction or a slimmer 25mm profile for tight clearances should consider other models.
The 30mm frame depth is the specification that determines suitability for high-restriction scenarios such as liquid-cooling radiators or cases with thick mesh panels. It provides the necessary static pressure where standard 25mm fans may struggle, while the daisy-chain linking system simplifies cable routing for multiple units.
| Brand | Phanteks |
|---|---|
| Series | D30-120 |
| Model | D30-120, Reversed, White |
| Part Number | PH-F120D30R_DRGB_PWM_WT01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 30mm |
| Bearing Type | FDB (Fluid Dynamic Bearing) |
| RPM | 250-2000±10% RPM |
| Air Flow | 61.5 CFM |
| Noise Level | 31.8 dB(A) |
| Power Connector | 4-Pin PWN |
| Color | White |
| LED | DRGB |
| Dimensions | 120 x 120 x 30 mm |
| Lähetyspaino | 0.39 kg |
| Pakkauksen mitat | 198 × 124 × 33 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The fan measures 120 x 120 x 30 mm, so verify your chassis or radiator has at least 30 mm clearance for this thicker frame.
Plug the 4-pin PWM header into the motherboard fan header and the 3-pin 5 V DRGB connector into a compatible motherboard or controller; use the included bridge connectors to link up to 10 fans in series.
The FDB bearing is rated for long life; plan to clean dust from the blades and frame every 6–12 months and replace the unit only if noise rises above 31.8 dB(A) or RPM drops below 250.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?