Phanteks PH-F140M25_G2_DWT01 140mm case fan white
- 1 Fan
- No Controller
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Phanteks
A 30 mm thick white 120 mm case fan with reverse airflow, DRGB lighting and PWM control delivers 61.5 CFM at 31.8 dB(A)
Fan Size 120mm
Style Reversed
Model D30
Option Single Fan
Preškrtnuté verzie existujú, ale nie sú tu skladom.
The Phanteks D30-120 is a 120mm case fan with a 30mm thick frame designed for reverse airflow direction. It uses a fluid dynamic bearing and a 4-pin PWM connector for speed control between 250 and 2000 RPM. Integrated DRGB lighting illuminates the blades and frame in a white finish.
Builders mounting fans on radiators or behind dense dust filters benefit from the 30mm thickness, which delivers 61.5 CFM at 31.8 dB(A). The reverse airflow variant ensures the illuminated blade side faces the interior. Buyers needing standard airflow direction or a slimmer 25mm profile for tight clearances should consider other models.
The 30mm frame depth is the specification that determines suitability for high-restriction scenarios such as liquid-cooling radiators or cases with thick mesh panels. It provides the necessary static pressure where standard 25mm fans may struggle, while the daisy-chain linking system simplifies cable routing for multiple units.
| Brand | Phanteks |
|---|---|
| Series | D30-120 |
| Model | D30-120, Reversed, White |
| Part Number | PH-F120D30R_DRGB_PWM_WT01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 30mm |
| Bearing Type | FDB (Fluid Dynamic Bearing) |
| RPM | 250-2000±10% RPM |
| Air Flow | 61.5 CFM |
| Noise Level | 31.8 dB(A) |
| Power Connector | 4-Pin PWN |
| Color | White |
| LED | DRGB |
| Dimensions | 120 x 120 x 30 mm |
| Prepravná hmotnosť | 0.39 kg |
| Rozmery balenia | 198 × 124 × 33 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The fan measures 120 x 120 x 30 mm, so verify your chassis or radiator has at least 30 mm clearance for this thicker frame.
Plug the 4-pin PWM header into the motherboard fan header and the 3-pin 5 V DRGB connector into a compatible motherboard or controller; use the included bridge connectors to link up to 10 fans in series.
The FDB bearing is rated for long life; plan to clean dust from the blades and frame every 6–12 months and replace the unit only if noise rises above 31.8 dB(A) or RPM drops below 250.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?