Phanteks PH-F140M25_G2_DWT01 140mm case fan white
- 1 Fan
- No Controller
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Phanteks
A 30 mm thick white 120 mm case fan with reverse airflow, DRGB lighting and PWM control delivers 61.5 CFM at 31.8 dB(A)
Fan Size 120mm
Style Reversed
Model D30
Option Single Fan
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Phanteks D30-120 is a 120mm case fan with a 30mm thick frame designed for reverse airflow direction. It uses a fluid dynamic bearing and a 4-pin PWM connector for speed control between 250 and 2000 RPM. Integrated DRGB lighting illuminates the blades and frame in a white finish.
Builders mounting fans on radiators or behind dense dust filters benefit from the 30mm thickness, which delivers 61.5 CFM at 31.8 dB(A). The reverse airflow variant ensures the illuminated blade side faces the interior. Buyers needing standard airflow direction or a slimmer 25mm profile for tight clearances should consider other models.
The 30mm frame depth is the specification that determines suitability for high-restriction scenarios such as liquid-cooling radiators or cases with thick mesh panels. It provides the necessary static pressure where standard 25mm fans may struggle, while the daisy-chain linking system simplifies cable routing for multiple units.
| Brand | Phanteks |
|---|---|
| Series | D30-120 |
| Model | D30-120, Reversed, White |
| Part Number | PH-F120D30R_DRGB_PWM_WT01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 30mm |
| Bearing Type | FDB (Fluid Dynamic Bearing) |
| RPM | 250-2000±10% RPM |
| Air Flow | 61.5 CFM |
| Noise Level | 31.8 dB(A) |
| Power Connector | 4-Pin PWN |
| Color | White |
| LED | DRGB |
| Dimensions | 120 x 120 x 30 mm |
| وزن الشحنة | 0.39 kg |
| أبعاد الطرد | 198 × 124 × 33 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The fan measures 120 x 120 x 30 mm, so verify your chassis or radiator has at least 30 mm clearance for this thicker frame.
Plug the 4-pin PWM header into the motherboard fan header and the 3-pin 5 V DRGB connector into a compatible motherboard or controller; use the included bridge connectors to link up to 10 fans in series.
The FDB bearing is rated for long life; plan to clean dust from the blades and frame every 6–12 months and replace the unit only if noise rises above 31.8 dB(A) or RPM drops below 250.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟