Phanteks PH-F140M25_PWM_BBK01 140mm 25mm case fan
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Phanteks
Three 120 mm hydraulic-bearing fans deliver 84.26 CFM at up to 2000 RPM with PWM control and daisy-chain cabling
Fan Size 120mm
Style Regular / No DRGB
Model M25
Option Triple Fans
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The Phanteks M25-120 three-pack delivers three 120mm by 25mm case fans with hydraulic bearings and PWM control. Each unit spins between 500 and 2000 RPM, pushing 84.26 CFM at a listed 35.7 dB(A). The fans are designed for high static pressure across fine mesh filters, heatsinks and radiators, and include daisy-chain cables for tidy single-header wiring.
Builders who currently run several fans from splitters or separate headers can consolidate to one PWM signal using the supplied daisy-chain leads. The jump is worthwhile when cable routing space is tight and the motherboard offers limited 4-pin headers, because the chain reduces clutter without sacrificing individual speed control across the trio.
At continuous 2000 RPM the fans maintain their rated airflow to keep demanding components cool, while the hydraulic bearing and high airflow-to-RPM ratio limit motor and bearing noise over long sessions. The wide 500 RPM floor also allows near-silent idling when thermal headroom returns, so acoustic output scales with actual cooling demand rather than staying fixed.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Fan, Black |
| Part Number | PH-F120M25_PWM_BBK01_3P |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-2000±10% RPM |
| Air Flow | 84.26 CFM |
| Noise Level | 35.7 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| Lähetyspaino | 0.25 kg |
| Pakkauksen mitat | 178 × 127 × 89 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each fan measures 120mm square and 25mm thick, so verify your chassis has three 120mm mounting positions with at least 25mm clearance per slot.
Plug the first fan's 4-pin PWM connector into the motherboard header, then link the second and third fans in series using the supplied daisy-chain cables; a common mistake is forgetting to seat each connector fully, which breaks the PWM signal chain.
Hydraulic bearings typically run for years, but if noise rises above the rated 35.7 dB(A) or RPM drops below the 500-2000 range, plan to swap the affected fan.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?