Phanteks PH-F140M25_PWM_BBK01 140mm 25mm case fan
- 1 Fan
- Case Fan
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Phanteks
Three 120 mm hydraulic-bearing fans deliver 84.26 CFM at up to 2000 RPM with PWM control and daisy-chain cabling
Fan Size 120mm
Style Regular / No DRGB
Model M25
Option Triple Fans
Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.
The Phanteks M25-120 three-pack delivers three 120mm by 25mm case fans with hydraulic bearings and PWM control. Each unit spins between 500 and 2000 RPM, pushing 84.26 CFM at a listed 35.7 dB(A). The fans are designed for high static pressure across fine mesh filters, heatsinks and radiators, and include daisy-chain cables for tidy single-header wiring.
Builders who currently run several fans from splitters or separate headers can consolidate to one PWM signal using the supplied daisy-chain leads. The jump is worthwhile when cable routing space is tight and the motherboard offers limited 4-pin headers, because the chain reduces clutter without sacrificing individual speed control across the trio.
At continuous 2000 RPM the fans maintain their rated airflow to keep demanding components cool, while the hydraulic bearing and high airflow-to-RPM ratio limit motor and bearing noise over long sessions. The wide 500 RPM floor also allows near-silent idling when thermal headroom returns, so acoustic output scales with actual cooling demand rather than staying fixed.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Fan, Black |
| Part Number | PH-F120M25_PWM_BBK01_3P |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-2000±10% RPM |
| Air Flow | 84.26 CFM |
| Noise Level | 35.7 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| Verzendgewicht | 0.25 kg |
| Pakketafmetingen | 178 × 127 × 89 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Each fan measures 120mm square and 25mm thick, so verify your chassis has three 120mm mounting positions with at least 25mm clearance per slot.
Plug the first fan's 4-pin PWM connector into the motherboard header, then link the second and third fans in series using the supplied daisy-chain cables; a common mistake is forgetting to seat each connector fully, which breaks the PWM signal chain.
Hydraulic bearings typically run for years, but if noise rises above the rated 35.7 dB(A) or RPM drops below the 500-2000 range, plan to swap the affected fan.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?