Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Brass 90-degree rotary elbow fitting with 20mm extension, male and female G 1/4 threads

PrimoChill

PrimoChill 90 Degree SX Rotary 20mm Extension Elbow Fitting diy cooling

SKU CH-TTDK-XNZ5S

A 90-degree rotary elbow with a 20mm extension redirects tubing runs and provides clearance for tight water-cooling loops

  • TypeFittings

Option Yellow

Näytä 9 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Rotary joint lets you aim connections 90 degrees freely
  • 20 mm extension adds clearance around tight components
  • Male and female G 1/4 threads fit standard water-cooling loops
  • Coated brass construction resists corrosion in liquid systems
  • Pre-installed O-ring on male side seals without extra parts

Loop routing fitting for custom water cooling

The PrimoChill Male to Female G 1/4in. 90 Degree SX Rotary 20mm Extension Elbow Fitting redirects tubing runs away from components at unconventional angles. The rotary function lets you aim the connection in any desired direction 90 degrees from the mount. A 20mm extension provides added clearance when other parts are in the way or extra height is needed. It suits builders who want a compact right-angle adapter with rotational freedom.

Sustained loop behaviour

The coated brass construction resists corrosion during continuous coolant circulation. The installed O-ring on the male threaded side maintains a seal under steady system pressure. Rotary joints can, on rare occasions, dislodge after being moved around, which may disengage seals. If this occurs, removing the fitting, pressing in on the joints and rotating them typically restores the seal. Testing for leaks after any adjustment is recommended.

Thermals noise and power

As a passive brass fitting, it adds no heat, noise or electrical draw to the loop. The 20mm extension and 90-degree elbow change only the physical routing of tubing. The rotary mechanism moves freely without requiring power. Users who need a fixed-angle elbow without rotational movement should consider a non-rotary alternative.

Kohokohdat

  • Rotary joint lets you aim connections 90 degrees freely
  • 20 mm extension adds clearance around tight components
  • Male and female G 1/4 threads fit standard water-cooling loops
  • Coated brass construction resists corrosion in liquid systems
  • Pre-installed O-ring on male side seals without extra parts

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 20mm extension on the rotary elbow add any pump noise or heat?

The fitting is a passive brass component with no moving parts, so it adds no pump noise and generates no heat during continuous operation.

Which G 1/4in ports must my loop already provide for this male-to-female elbow to thread in?

You need one female G 1/4in port for the male thread and one male G 1/4in port or component for the female thread to accept.

Will the coated brass rotary joint react with nickel-plated blocks or radiators I keep in the loop?

Coated brass is compatible with standard nickel-plated copper and brass components when used with proper coolant and corrosion inhibitors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.