Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Fluorescent yellow PLA+ filament spool, 1.75 mm diameter, 1 kg net weight

PrintOxe

PrintOxe PLA+ Pro Filament Fluorescent Yellow 1.75 mm 1 kg +/- .03 mm

SKU CH-W0B9-A1Y5C

Fluorescent yellow PLA+ filament with ±.03 mm accuracy, 1.75 mm diameter and 1 kg net weight on a vacuum-sealed spool

  • ColorYellow
  • TypeFilament
  • Fluorescent yellow colour adds high visibility to prints
  • 75 mm diameter fits standard FDM printers
  • Dimensional accuracy ±.03 mm gives consistent extrusion
  • 1 kg net weight vacuum-sealed with desiccant resists moisture
  • Extrusion temperature 190 °C – 200 °C suits common PLA+ settings

PrintOxe PLA+ Pro 1.75 mm filament

This PLA+ Pro filament from PrintOxe is a 1.75 mm diameter spool weighing 1 kg net. It is designed for fused deposition modelling printers that accept 1.75 mm material. The fluorescent yellow colour suits hobbyists and makers producing visible parts or prototypes. Vacuum sealing with desiccant protects the spool from moisture before use.

Dimensional accuracy ±0.03 mm

The filament holds a tolerance of ±0.03 mm on its 1.75 mm diameter, which keeps extrusion consistent across long prints. Consistent diameter reduces the risk of nozzle clogging and helps maintain layer adhesion. The spool measures 7.88 inches in diameter, 2.69 inches wide and has a 2.20 inch hub hole. These dimensions fit most standard filament holders without modification.

Extrusion temperature 190 °C to 200 °C

The recommended nozzle temperature range is 190 °C to 200 °C (374 °F to 392 °F), so printers must reach and hold this window for reliable flow. Machines limited to lower hot-end temperatures or those requiring higher heat for other materials may not suit this spool. The material is made from 100 % high-purity PLA+ with minimal warping and no added recycled content.

Kohokohdat

  • Fluorescent yellow colour adds high visibility to prints
  • 75 mm diameter fits standard FDM printers
  • Dimensional accuracy ±.03 mm gives consistent extrusion
  • 1 kg net weight vacuum-sealed with desiccant resists moisture
  • Extrusion temperature 190 °C – 200 °C suits common PLA+ settings

Tekniset tiedot

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorYellow
TypeFilament

Kysymyksiä tästä tuotteesta

Should I pick the 1 kg spool or a different weight?

This listing supplies a single 1 kg net spool (2.2 lbs) vacuum-sealed with desiccant; no other weights are offered here.

What does the ±0.03 mm tolerance mean for my prints?

The tight 1.75 mm ±0.03 mm accuracy keeps extrusion consistent, reducing clogs, blistering and layer gaps for smoother surfaces.

Will the 1.75 mm diameter work with my FDM printer?

Yes — it fits any FDM machine that takes 1.75 mm filament, including Creality, Prusa, Ultimaker, Flashforge and many others.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.