暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Fluorescent yellow PLA+ filament spool, 1.75 mm diameter, 1 kg net weight

PrintOxe

PrintOxe PLA+ Pro Filament Fluorescent Yellow 1.75 mm 1 kg +/- .03 mm

SKU CH-W0B9-A1Y5C

Fluorescent yellow PLA+ filament with ±.03 mm accuracy, 1.75 mm diameter and 1 kg net weight on a vacuum-sealed spool

  • ColorYellow
  • TypeFilament
  • Fluorescent yellow colour adds high visibility to prints
  • 75 mm diameter fits standard FDM printers
  • Dimensional accuracy ±.03 mm gives consistent extrusion
  • 1 kg net weight vacuum-sealed with desiccant resists moisture
  • Extrusion temperature 190 °C – 200 °C suits common PLA+ settings

PrintOxe PLA+ Pro 1.75 mm filament

This PLA+ Pro filament from PrintOxe is a 1.75 mm diameter spool weighing 1 kg net. It is designed for fused deposition modelling printers that accept 1.75 mm material. The fluorescent yellow colour suits hobbyists and makers producing visible parts or prototypes. Vacuum sealing with desiccant protects the spool from moisture before use.

Dimensional accuracy ±0.03 mm

The filament holds a tolerance of ±0.03 mm on its 1.75 mm diameter, which keeps extrusion consistent across long prints. Consistent diameter reduces the risk of nozzle clogging and helps maintain layer adhesion. The spool measures 7.88 inches in diameter, 2.69 inches wide and has a 2.20 inch hub hole. These dimensions fit most standard filament holders without modification.

Extrusion temperature 190 °C to 200 °C

The recommended nozzle temperature range is 190 °C to 200 °C (374 °F to 392 °F), so printers must reach and hold this window for reliable flow. Machines limited to lower hot-end temperatures or those requiring higher heat for other materials may not suit this spool. The material is made from 100 % high-purity PLA+ with minimal warping and no added recycled content.

特長

  • Fluorescent yellow colour adds high visibility to prints
  • 75 mm diameter fits standard FDM printers
  • Dimensional accuracy ±.03 mm gives consistent extrusion
  • 1 kg net weight vacuum-sealed with desiccant resists moisture
  • Extrusion temperature 190 °C – 200 °C suits common PLA+ settings

仕様

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorYellow
TypeFilament

この商品に関する質問

Should I pick the 1 kg spool or a different weight?

This listing supplies a single 1 kg net spool (2.2 lbs) vacuum-sealed with desiccant; no other weights are offered here.

What does the ±0.03 mm tolerance mean for my prints?

The tight 1.75 mm ±0.03 mm accuracy keeps extrusion consistent, reducing clogs, blistering and layer gaps for smoother surfaces.

Will the 1.75 mm diameter work with my FDM printer?

Yes — it fits any FDM machine that takes 1.75 mm filament, including Creality, Prusa, Ultimaker, Flashforge and many others.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。