Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular matte black ATX power supply with fixed cables and large fan grille

Pstaroth

Pstaroth 2000W ATX Mining Power Supply Bold 12AWG

SKU CH-HZ7Z-XW80H

Delivers 2000 W through 16 PCIe and eight SATA connectors with a 90 % conversion rate and auto-switching 110–240 V input

  • TypeATX
  • Maximum Power2000 W
  • ModularNon-Modular
  • Dimensions15*16.5*8.5cm
  • Weight3kg
  • Package Content1x Power supply Interface: 3 x IDE 1 x 4+4 Pin 16 x 6+2 Pin
  • Delivers 2000 W to run 8 GPU rigs
  • 90 % conversion rate cuts electricity waste
  • Auto-switching 110 – 240 V input suits any mains supply
  • 165 mm fan with thermal control keeps temperatures below 50 °C
  • Pure copper 12 AWG cables with 16 x 6+2 pin connectors feed every card

High-output ATX mining supply

This 2000W ATX unit is built for multi-GPU mining rigs that need a single non-modular power source. It accepts 100-120V or 200-240V input and auto-switches between them. A 165mm ball-bearing fan with auto-thermal control manages airflow, while a dust cover protects internals in harsh environments. The 90% conversion rate reduces waste heat during continuous operation.

Sixteen 6+2-pin connectors for eight GPUs

Sixteen 6+2-pin outputs let you run eight graphics cards such as the 370, 470, 380, 480, 580, 1060, 1070, 1080, 2070, 2080, 5700, 5600, 3070 or 3080 from one chassis. Eight SATA ports handle risers or storage, while one 20+4-pin and one 4+4-pin feed the motherboard and CPU. Maximum draw reaches 2400W, so sustained loads above 1000W should run on 220V for stability. High-temperature protection triggers at 50°C to prevent damage.

Compact non-modular chassis with fixed loom

The 15×16.5×8.5cm housing weighs 3kg and fits standard ATX bays, but every cable is hard-wired so cable management space must be planned ahead. Pure copper conductors on all leads resist heat and fatigue during 24/7 loads. Short-circuit and over-voltage safeguards protect attached components. The fixed 3×IDE, 16×6+2-pin, 8×SATA, 1×20+4-pin and 1×4+4-pin harness eliminates loose connectors but demands a case with generous routing room behind the motherboard tray.

Kohokohdat

  • Delivers 2000 W to run 8 GPU rigs
  • 90 % conversion rate cuts electricity waste
  • Auto-switching 110 – 240 V input suits any mains supply
  • 165 mm fan with thermal control keeps temperatures below 50 °C
  • Pure copper 12 AWG cables with 16 x 6+2 pin connectors feed every card

Tekniset tiedot

TypeATX
Maximum Power2000 W
ModularNon-Modular
Dimensions15*16.5*8.5cm
Weight3kg
Package Content1x Power supply Interface: 3 x IDE 1 x 4+4 Pin 16 x 6+2 Pin 8 x SATA 1 x 20+4 Pin
Input Voltage100 - 120 V/ 200 - 240 V

Kysymyksiä tästä tuotteesta

Will this 2000W ATX unit run alongside my existing 110 V circuit or do I need 220 V for an 8‑GPU rig?

It accepts 100‑120 V and 200‑240 V automatically; 220 V is recommended when total draw exceeds 1000 W.

How can I confirm the fan is responding to temperature after I install the PSU?

The 165 mm ball‑bearing fan spins up when internal temperature rises above 50 °C and runs quieter below that threshold.

Which cables come attached to the non‑modular PSU for an 8‑GPU build?

Fixed leads include one 20+4 pin, one 4+4 pin, sixteen 6+2 pin, eight SATA and three IDE connectors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.