Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

Pstaroth

Pstaroth 2000W ATX Mining Power Supply Bold 12AWG

SKU CH-HZ7Z-XW80H

Delivers 2000 W through 16 PCIe and eight SATA connectors with a 90 % conversion rate and auto-switching 110–240 V input

  • TypeATX
  • Maximum Power2000 W
  • ModularNon-Modular
  • Dimensions15*16.5*8.5cm
  • Weight3kg
  • Package Content1x Power supply Interface: 3 x IDE 1 x 4+4 Pin 16 x 6+2 Pin
  • Delivers 2000 W to run 8 GPU rigs
  • 90 % conversion rate cuts electricity waste
  • Auto-switching 110 – 240 V input suits any mains supply
  • 165 mm fan with thermal control keeps temperatures below 50 °C
  • Pure copper 12 AWG cables with 16 x 6+2 pin connectors feed every card

High-output ATX mining supply

This 2000W ATX unit is built for multi-GPU mining rigs that need a single non-modular power source. It accepts 100-120V or 200-240V input and auto-switches between them. A 165mm ball-bearing fan with auto-thermal control manages airflow, while a dust cover protects internals in harsh environments. The 90% conversion rate reduces waste heat during continuous operation.

Sixteen 6+2-pin connectors for eight GPUs

Sixteen 6+2-pin outputs let you run eight graphics cards such as the 370, 470, 380, 480, 580, 1060, 1070, 1080, 2070, 2080, 5700, 5600, 3070 or 3080 from one chassis. Eight SATA ports handle risers or storage, while one 20+4-pin and one 4+4-pin feed the motherboard and CPU. Maximum draw reaches 2400W, so sustained loads above 1000W should run on 220V for stability. High-temperature protection triggers at 50°C to prevent damage.

Compact non-modular chassis with fixed loom

The 15×16.5×8.5cm housing weighs 3kg and fits standard ATX bays, but every cable is hard-wired so cable management space must be planned ahead. Pure copper conductors on all leads resist heat and fatigue during 24/7 loads. Short-circuit and over-voltage safeguards protect attached components. The fixed 3×IDE, 16×6+2-pin, 8×SATA, 1×20+4-pin and 1×4+4-pin harness eliminates loose connectors but demands a case with generous routing room behind the motherboard tray.

Pontos fortes

  • Delivers 2000 W to run 8 GPU rigs
  • 90 % conversion rate cuts electricity waste
  • Auto-switching 110 – 240 V input suits any mains supply
  • 165 mm fan with thermal control keeps temperatures below 50 °C
  • Pure copper 12 AWG cables with 16 x 6+2 pin connectors feed every card

Especificações

TypeATX
Maximum Power2000 W
ModularNon-Modular
Dimensions15*16.5*8.5cm
Weight3kg
Package Content1x Power supply Interface: 3 x IDE 1 x 4+4 Pin 16 x 6+2 Pin 8 x SATA 1 x 20+4 Pin
Input Voltage100 - 120 V/ 200 - 240 V

Perguntas sobre este artigo

Will this 2000W ATX unit run alongside my existing 110 V circuit or do I need 220 V for an 8‑GPU rig?

It accepts 100‑120 V and 200‑240 V automatically; 220 V is recommended when total draw exceeds 1000 W.

How can I confirm the fan is responding to temperature after I install the PSU?

The 165 mm ball‑bearing fan spins up when internal temperature rises above 50 °C and runs quieter below that threshold.

Which cables come attached to the non‑modular PSU for an 8‑GPU build?

Fixed leads include one 20+4 pin, one 4+4 pin, sixteen 6+2 pin, eight SATA and three IDE connectors.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.