PUSKILL KILLBLADE DDR4 32GB (2x16GB) 3200MHz CL16 desktop RAM
- CL16
- 1.35V
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
PUSKILL
A 32 GB dual-channel DDR4 kit running at 2666 MHz with RGB lighting for desktop upgrades
Option 2x16GB 2666MHz CL19 1.2V
This 32GB kit (two 16GB modules) targets users who edit high-resolution video, run virtual machines or keep many browser tabs open while gaming. It is built for desktop systems that support DDR4 memory.
The 288-pin UDIMMs press into motherboard slots until the side clips click, requiring no software or special tools. Motherboards often default to 2133MHz at first boot; enable XMP or DOCP in BIOS to reach 2666MHz. If the system will not boot or shows only 16GB, reseat modules firmly in the recommended slots, usually the second and fourth, and test each module individually to rule out a slot fault. Mixing this kit with existing memory of different capacity or brand can cause instability.
The 32GB capacity handles heavy multitasking, video editing and virtual machines comfortably. Dual-channel operation doubles bandwidth for smoother frame rates and faster rendering. Stability depends on the CPU and motherboard maximum supported frequency; if those limits sit below 2666MHz the kit will run at the lower speed. The modules operate at 1.2V standard voltage with CL19 latency and 11-11-11-36 timing.
| CAS Latency | CL19 |
|---|---|
| Voltage | 1.35V |
| Timing | 11-11-11-36 |
| Capacity | 32GB |
| Recommend Use | High Performance or Gaming Memory |
| tRAC | 30ns |
| ECC | ECC Chipkill |
| Tested Frequency | 2666 MHz |
| Tested Timing | CL19 |
| BIOS/Performance Profile | AMD EXPO |
| Color | Black |
| Features | Non-ECC |
| LED Color | RGB |
| Brand | PUSKILL |
| Series | Vengeance |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
No. These are 288-pin UDIMM modules built for desktop motherboards only. They will not fit laptop SODIMM slots.
Enable XMP on Intel or DOCP on AMD in the BIOS. The rated 2666MHz speed requires that profile to be active.
For best stability use this 2×16GB kit alone. Mixing different capacities or brands often prevents dual-channel operation and can cause crashes.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?