Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black rectangular DDR4 sticks side by side, no heat spreader, plain green PCB with black chips, 288-pin edge connectors visible

PUSKILL

PUSKILL KILLBLADE DDR4 32GB (2x16GB) 3200MHz CL16 desktop RAM

SKU CH-9J51-H8WM6

A 32GB dual-channel DDR4 kit running at 3200MHz with CL16 timings and 1.35V for Intel XMP 2.0 and AMD Ryzen desktops

  • CAS LatencyCL16
  • Voltage1.35V
  • Multi-channel KitDual Channel Kit
  • Timing11-11-11-36
  • ChipsetSamsung, Hynix, Micron
  • Capacity32GB

Option 2x16GB 3200MHz CL16 1.35V

  • Smoother multitasking with 3200MHz DDR4 speed
  • Responsive gaming from tight CL16-18-18-42 timings
  • 32GB dual-channel kit handles heavy workloads
  • Intel XMP 2.0 profile enables rated speed instantly
  • Low 1.35V voltage reduces power draw

32GB Dual-Channel Kit

This 32GB kit contains two 16GB modules for dual-channel operation on desktop systems. It targets users who need extra headroom for gaming, streaming or content creation workloads. The kit runs at DDR4 3200 with tested CL16 timings and a 1.35V operating voltage.

DDR4 3200 Interface Limits

The DDR4 3200 standard caps transfer rates at 3200 MT/s and PC4-25600 bandwidth. The kit uses Intel XMP 2.0 profiles to reach the rated speed automatically on supported platforms. AMD Ryzen systems can also run the memory at the same frequency with manual BIOS configuration. Tighter timings than CL16-18-18-42 are not guaranteed by the profile.

Capacity Headroom For Multitasking

The 32GB capacity handles modern games, video editing timelines and 3D rendering scenes without hitting the swap file. Heavy multitasking across multiple virtual machines or large dataset processing may still exhaust the available memory. The registered design and lack of ECC limit use to consumer desktop boards that accept registered unbuffered modules.

Kohokohdat

  • Smoother multitasking with 3200MHz DDR4 speed
  • Responsive gaming from tight CL16-18-18-42 timings
  • 32GB dual-channel kit handles heavy workloads
  • Intel XMP 2.0 profile enables rated speed instantly
  • Low 1.35V voltage reduces power draw

Tekniset tiedot

CAS LatencyCL16
Voltage1.35V
Multi-channel KitDual Channel Kit
Timing11-11-11-36
ChipsetSamsung, Hynix, Micron
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
Recommend UseAMD & Intel Compatible
tRAC30ns
ECCNo
Buffered/RegisteredRegistered
Heat SpreaderNo
Type288-Pin PC RAM
Tested Frequency3200 MHz
Tested TimingCL16
BIOS/Performance ProfileIntel XMP 2.0 only
ColorBlack
LED ColorNone
BrandPUSKILL
SeriesKILLBLADE
ModelDDR4

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the kit run at 3200 MHz automatically on a Ryzen motherboard?

The modules carry an Intel XMP 2.0 profile; on Ryzen you enable the equivalent DOCP or EXPO setting in BIOS to reach the rated speed.

Does the 1.35 V rating require a motherboard that supports voltages above the standard 1.35 V?

No, 1.35 V is within the normal DDR4 range and works on any board that accepts DDR4 memory.

Is the memory unbuffered or registered, and does that affect consumer desktop use?

The spec lists the kit as registered, which is intended for server platforms; most consumer desktop motherboards require unbuffered DIMMs and will not post with registered modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.