PUSKILL
PUSKILL KILLBLADE DDR4 32GB (2x16GB) 3200MHz CL16 desktop RAM
A 32GB dual-channel DDR4 kit running at 3200MHz with CL16 timings and 1.35V for Intel XMP 2.0 and AMD Ryzen desktops
- CAS LatencyCL16
- Voltage1.35V
- Multi-channel KitDual Channel Kit
- Timing11-11-11-36
- ChipsetSamsung, Hynix, Micron
- Capacity32GB
Option 2x16GB 3200MHz CL16 1.35V
- 2x16GB 3200MHz CL16 1.35V
- 2x16GB 2666MHz CL19 1.2V
- Smoother multitasking with 3200MHz DDR4 speed
- Responsive gaming from tight CL16-18-18-42 timings
- 32GB dual-channel kit handles heavy workloads
- Intel XMP 2.0 profile enables rated speed instantly
- Low 1.35V voltage reduces power draw
32GB Dual-Channel Kit
This 32GB kit contains two 16GB modules for dual-channel operation on desktop systems. It targets users who need extra headroom for gaming, streaming or content creation workloads. The kit runs at DDR4 3200 with tested CL16 timings and a 1.35V operating voltage.
DDR4 3200 Interface Limits
The DDR4 3200 standard caps transfer rates at 3200 MT/s and PC4-25600 bandwidth. The kit uses Intel XMP 2.0 profiles to reach the rated speed automatically on supported platforms. AMD Ryzen systems can also run the memory at the same frequency with manual BIOS configuration. Tighter timings than CL16-18-18-42 are not guaranteed by the profile.
Capacity Headroom For Multitasking
The 32GB capacity handles modern games, video editing timelines and 3D rendering scenes without hitting the swap file. Heavy multitasking across multiple virtual machines or large dataset processing may still exhaust the available memory. The registered design and lack of ECC limit use to consumer desktop boards that accept registered unbuffered modules.
Pluspunten
- Smoother multitasking with 3200MHz DDR4 speed
- Responsive gaming from tight CL16-18-18-42 timings
- 32GB dual-channel kit handles heavy workloads
- Intel XMP 2.0 profile enables rated speed instantly
- Low 1.35V voltage reduces power draw
Specificaties
| CAS Latency | CL16 |
|---|---|
| Voltage | 1.35V |
| Multi-channel Kit | Dual Channel Kit |
| Timing | 11-11-11-36 |
| Chipset | Samsung, Hynix, Micron |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| Recommend Use | AMD & Intel Compatible |
| tRAC | 30ns |
| ECC | No |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Type | 288-Pin PC RAM |
| Tested Frequency | 3200 MHz |
| Tested Timing | CL16 |
| BIOS/Performance Profile | Intel XMP 2.0 only |
| Color | Black |
| LED Color | None |
| Brand | PUSKILL |
| Series | KILLBLADE |
| Model | DDR4 |
Andere versies van dit model
Nog 1 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Vragen over dit artikel
Will the kit run at 3200 MHz automatically on a Ryzen motherboard?
The modules carry an Intel XMP 2.0 profile; on Ryzen you enable the equivalent DOCP or EXPO setting in BIOS to reach the rated speed.
Does the 1.35 V rating require a motherboard that supports voltages above the standard 1.35 V?
No, 1.35 V is within the normal DDR4 range and works on any board that accepts DDR4 memory.
Is the memory unbuffered or registered, and does that affect consumer desktop use?
The spec lists the kit as registered, which is intended for server platforms; most consumer desktop motherboards require unbuffered DIMMs and will not post with registered modules.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM




