Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Raspberry Pi 7-inch touch display with adapter board and ribbon cable

Raspberry Pi

Raspberry Pi SC1227 7-inch touch display 800x480 10-point

SKU CH-J8ZE-B0WFZ

A 7-inch capacitive touchscreen with 800x480 resolution and 10-point touch connects to Raspberry Pi boards via DSI ribbon cable and GPIO power

  • 7-inch display fits portable and embedded builds
  • 800 x 480 resolution with 10-point capacitive touch
  • Two connections only: GPIO power and DSI ribbon cable
  • Adapter board handles power conversion and touch input
  • Kit includes display, adapter board, ribbon cable, stand-offs and jumper wires

Raspberry Pi SC1227 7-inch touch display

This 7-inch capacitive touchscreen connects to compatible Raspberry Pi single-board computers via DSI ribbon cable and GPIO power. It provides an 800 x 480 resolution panel with 10-point touch sensing for interactive projects. The integrated adapter board handles signal conversion and touch input. Kit includes stand-offs, screws, and jumper wires for assembly.

800 x 480 resolution and 10-point capacitive touch

The display comfortably handles portable tablets, infotainment interfaces, and embedded control panels where a keyboard and mouse are impractical. Ten-finger touch and an on-screen keyboard are supported in Raspberry Pi OS. It runs out when a project demands higher pixel density, larger screen real estate, or HDMI and USB connectivity not provided by the DSI interface.

Replaces separate monitor, keyboard.

The all-in-one kit upgrades fragmented desktop arrangements into a compact integrated unit for mobile or space-constrained builds. The jump is worth it when deploying Raspberry Pi projects that require direct touch interaction without external peripherals. It does not suit builders who need HDMI input, multi-monitor support, or compatibility with Raspberry Pi Zero models lacking a DSI port.

Kohokohdat

  • 7-inch display fits portable and embedded builds
  • 800 x 480 resolution with 10-point capacitive touch
  • Two connections only: GPIO power and DSI ribbon cable
  • Adapter board handles power conversion and touch input
  • Kit includes display, adapter board, ribbon cable, stand-offs and jumper wires

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Will the 800 x 480 touchscreen work with my Raspberry Pi 3B using the DSI ribbon cable and GPIO power?

The display connects to any Raspberry Pi with a DSI port via the included ribbon cable and draws power from the GPIO header; the Pi 3B has both, so it works with the supplied adapter board.

How can I verify the 10-point capacitive touch is functioning after I connect the display?

Boot Raspberry Pi OS; the on-screen keyboard appears automatically and you can test all ten simultaneous touch points by tapping multiple spots at once.

Does the box include the DSI ribbon cable and stand-offs, or must I buy them separately?

The kit contains the 7-inch touchscreen, adapter board, DSI ribbon cable, four stand-offs with screws and four jumper wires; no extra parts are required for basic operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.