暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Raspberry Pi 7-inch touch display with adapter board and ribbon cable

Raspberry Pi

Raspberry Pi SC1227 7-inch touch display 800x480 10-point

SKU CH-J8ZE-B0WFZ

A 7-inch capacitive touchscreen with 800x480 resolution and 10-point touch connects to Raspberry Pi boards via DSI ribbon cable and GPIO power

  • 7-inch display fits portable and embedded builds
  • 800 x 480 resolution with 10-point capacitive touch
  • Two connections only: GPIO power and DSI ribbon cable
  • Adapter board handles power conversion and touch input
  • Kit includes display, adapter board, ribbon cable, stand-offs and jumper wires

Raspberry Pi SC1227 7-inch touch display

This 7-inch capacitive touchscreen connects to compatible Raspberry Pi single-board computers via DSI ribbon cable and GPIO power. It provides an 800 x 480 resolution panel with 10-point touch sensing for interactive projects. The integrated adapter board handles signal conversion and touch input. Kit includes stand-offs, screws, and jumper wires for assembly.

800 x 480 resolution and 10-point capacitive touch

The display comfortably handles portable tablets, infotainment interfaces, and embedded control panels where a keyboard and mouse are impractical. Ten-finger touch and an on-screen keyboard are supported in Raspberry Pi OS. It runs out when a project demands higher pixel density, larger screen real estate, or HDMI and USB connectivity not provided by the DSI interface.

Replaces separate monitor, keyboard.

The all-in-one kit upgrades fragmented desktop arrangements into a compact integrated unit for mobile or space-constrained builds. The jump is worth it when deploying Raspberry Pi projects that require direct touch interaction without external peripherals. It does not suit builders who need HDMI input, multi-monitor support, or compatibility with Raspberry Pi Zero models lacking a DSI port.

特長

  • 7-inch display fits portable and embedded builds
  • 800 x 480 resolution with 10-point capacitive touch
  • Two connections only: GPIO power and DSI ribbon cable
  • Adapter board handles power conversion and touch input
  • Kit includes display, adapter board, ribbon cable, stand-offs and jumper wires

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 800 x 480 touchscreen work with my Raspberry Pi 3B using the DSI ribbon cable and GPIO power?

The display connects to any Raspberry Pi with a DSI port via the included ribbon cable and draws power from the GPIO header; the Pi 3B has both, so it works with the supplied adapter board.

How can I verify the 10-point capacitive touch is functioning after I connect the display?

Boot Raspberry Pi OS; the on-screen keyboard appears automatically and you can test all ten simultaneous touch points by tapping multiple spots at once.

Does the box include the DSI ribbon cable and stand-offs, or must I buy them separately?

The kit contains the 7-inch touchscreen, adapter board, DSI ribbon cable, four stand-offs with screws and four jumper wires; no extra parts are required for basic operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。