Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with two black SATA ports and gold PCIe edge connector

sakose

sakose BT-PES322i PCI Express to SATA expansion card 2 ports

SKU CH-YPMM-NMA27 MPN BT-PES322i

Adds two SATA 3.0 ports via a PCI Express 2.0 slot, compatible with SATA 6G, 3G and 1.5G drives, and supports RAID 0 and 1

  • TypePCI Express to SATA Card
  • Internal Ports2 x SATA 3.0
  • Operating Systems SupportedWindows XP, 2003 Server, Vista, 2008 Server and 7 (32/64-bit
  • SpecificationsCompliant with PCI Express 2.0 Supports communication speed
  • Package ContentsPCIe SATAIII 2 ports Card 1 x User Manual 1 x Driver CD
  • Add two internal SATA 3.0 ports via a single PCI Express 2.0 slot
  • Achieve up to 6 Gbps drive throughput with SATA 3.0 specification compliance
  • Connect legacy and modern drives through backward compatibility with SATA 6G, 3G and 1.5G speeds
  • Enable hot-swap and hot-plug capability for drive changes without system shutdown
  • Configure RAID 0 or RAID 1 arrays using the onboard RAID function

Two internal SATA 3.0 ports

The sakose BT-PES322i adds two SATA 3.0 ports through a PCI Express 2.0 slot. It suits owners of older Windows systems such as XP, Vista or Windows 7 who need extra internal drive connections. The card supports SATA 6G, 3G and 1.5G devices and includes RAID 0 and 1 functions.

Low-profile bracket eases fit

A low-profile bracket is supplied so the card fits slim chassis without modification. Installation requires a free PCIe slot and the driver CD for the listed operating systems. Hot-swap and hot-plug work only when the connected drives and backplane also support those functions.

Sustained throughput limited by PCIe 2.0

Under continuous load the PCIe 2.0 x1 link caps total bandwidth at 5.0 Gbps, so two SATA 3.0 drives cannot both run at 6 Gbps simultaneously. Port multiplier support and NCQ help maintain steady performance across multiple drives, but the bus ceiling remains the bottleneck.

Kohokohdat

  • Add two internal SATA 3.0 ports via a single PCI Express 2.0 slot
  • Achieve up to 6 Gbps drive throughput with SATA 3.0 specification compliance
  • Connect legacy and modern drives through backward compatibility with SATA 6G, 3G and 1.5G speeds
  • Enable hot-swap and hot-plug capability for drive changes without system shutdown
  • Configure RAID 0 or RAID 1 arrays using the onboard RAID function

Tekniset tiedot

BrandBYTECC
ModelBT-PES322i
TypePCI Express to SATA Card
Internal Ports2 x SATA 3.0
Operating Systems SupportedWindows XP, 2003 Server, Vista, 2008 Server and 7 (32/64-bit)
SpecificationsCompliant with PCI Express 2.0 Supports communication speed of 2.5Gbps & 5.0Gbps Compliant with SATA 3.0 specification Compatible with SATA 6G, 3G & 1.5G Hard drive Hot-swap & Hot Plug Supports Port Multiplier FIS based switching or command based switching Supports Native Command Queuing(NCQ) Supports RAID function 0 and 1 Supports ATA/ATAPI-7 Spec, Supports ATA & ATAPI commands Supports DMA protocols, and up to UDMA 150Mbps data transfer rate Supports Master and Slave operations from a single PATA port Supports PCI Low Profile
Package ContentsPCIe SATAIII 2 ports Card 1 x User Manual 1 x Driver CD

Kysymyksiä tästä tuotteesta

How can I verify the BT-PES322i is running at SATA 3.0 speeds after installation?

Check the device manager or BIOS to confirm the SATA ports negotiate at 6Gbps, which indicates SATA 3.0 operation with connected drives.

What comes in the box with the sakose BT-PES322i and what must I provide?

The package includes the PCIe SATAIII 2-port card, a user manual and a driver CD; you must supply SATA data cables and a compatible PCI Express 2.0 slot.

Which version of the BT-PES322i should I choose for a Windows 7 64-bit system?

The card supports Windows 7 (32/64-bit) along with XP, Vista, 2003 Server and 2008 Server, so the single listed model covers that OS.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.