Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 memory module with black chips, no heat spreader

SAMSUNG

SAMSUNG M393B1G73DB0-YK0 8GB DDR3 1600 ECC Registered server RAM

SKU CH-PH30-N4X6G MPN M393B1G73DB0-YK0

8GB DDR3 1600 ECC registered server memory model M393B1G73DB0-YK0 with CL11 latency and 1.35V operation

  • Capacity8GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable multi-module servers
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • Low 1.35V operation cuts power draw and heat in dense racks
  • CL11 latency keeps access times tight for consistent throughput

8GB DDR3 1600 ECC Registered module

This 8 GB DDR3 1600 module is built for servers and workstations that require error-correcting registered memory. It operates at 1.35 V with a CAS latency of CL11 and uses the standard 240-pin form factor. The stick has no heat spreader, keeping the profile low for dense configurations.

Upgrade from non-ECC or slower DDR3

Replaces unbuffered or lower-speed DDR3 DIMMs when data integrity and signal stability are required. The registered buffer reduces electrical load on the memory controller, making the jump worthwhile for multi-DIMM channels or mission-critical workloads. Systems limited to 1.5 V DDR3 will not support the 1.35 V operating voltage.

Simple 240-pin installation.

Installation follows the usual 240-pin DDR3 slot alignment; press evenly until the latches click. The most common issue is mixing registered and unbuffered modules, which prevents boot. Verify the platform supports 1.35 V DDR3 1600 and registered ECC before seating the DIMM.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable multi-module servers
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • Low 1.35V operation cuts power draw and heat in dense racks
  • CL11 latency keeps access times tight for consistent throughput

Tekniset tiedot

BrandSAMSUNG
ModelM393B1G73DB0-YK0
Capacity8GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Heat SpreaderNo
FeaturesReliable, high performance
Lähetyspaino0.09 kg
Pakkauksen mitat140 × 51 × 13 mm

Kysymyksiä tästä tuotteesta

Will this 240-pin DDR3 module fit my server DIMM slots?

The module uses the standard 240-pin DDR3 form factor and 1.35 V operation, matching server slots wired for PC3-12800 memory.

What is the correct way to seat this registered ECC stick, and what step is often missed?

Align the key notch, press firmly until both side clips click, then verify the system recognises the registered buffer and ECC at 1600 MT/s.

When should I expect to replace this 8 GB DDR3 module in a 24/7 server?

DDR3 DRAM has no moving parts; plan replacement only if ECC logs show rising correctable errors or a DIMM fails POST.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.